Tag Archives: screw for compressor

China Custom 15kw/20HP Screw Air Compressor for Construction Works with High Efficiency air compressor price

Product Description

LG-II series two-stage air compressor

Product Description

Main Machine:

Adopt two-stage compression main engine, large rotor and low speed.
The upper and lower integrated design concept combines the first-stage compression rotor and the second-stage compression rotor in 1 casing to achieve the highest compression transfer efficiency.

3. The compression ratio of each stage is small, the leakage is smaller, and the volume utilization rate is high. The bearing is less stressed and has a long service life.

Intake system:
Vertical straight-through air intake structure minimizes pressure loss, special air inlet sealing material ensures long service life, no wearing parts, reliable performance and long service life.

Piping system:
The pipeline system adopts the American standard pipeline design. Due to the large inner diameter of the transport pipe and the small flow resistance, the hard pipe usually has a higher transport rate than the hose, and is stable, long service life, and maintenance-free for life.

Permanent magnet motor:
The variable frequency permanent magnet motor has the characteristics of high efficiency, high power factor, wide high efficiency interval, stable speed, zero slip, and energy saving. Therefore, the permanent magnet frequency conversion equipment under the two-stage CHINAMFG can be more energy saving.

Controller:

Adopt advanced microcomputer control to achieve intelligent operation and humanized operation, and the operation status is clear at a glance.

2. Equipped with advanced intelligent control system, various parameters such as pressure and temperature are continuously monitored, controlled and displayed according to preset values.
3. It has the function of automatic fault alarm and protection, and stores historical operation records in time.

Product Feature
Energy saving analysis

The compression ratio of each stage is much smaller than the compression ratio of the common main engine of the same power, and by oil injection cooling, the temperature of the secondary intake air is reduced, and the compression work is greatly reduced.
The low pressure ratio greatly reduces the backflow leakage between the rotors, and greatly improves the volumetric efficiency and adiabatic efficiency, which is ultimately reflected in the increase in the compressed gas production.
Two-stage compression is better than single-stage at the same power.

Specification

Mode		L571A-11	L030A-11	L037A-11
Machine Set	Exhaust volume (m³/min)	4.2	6.2	7.2
	Exhaust pressure (MPa)	0.8	0.8	0.8
	Compression level	2	2	2
	Motor power(kw)	22	30	37
	Motor speed(rpm)	1480	1480	1480
	Energy efficiency rating	Grade I	Grade I	Grade I
	Start method	soft start	soft start	soft start
	Transmission mode	direct connection	direct connection	direct connection
	Connection size	G1-1/2″	G1-1/2″	G1-1/2″
	Cooling method	air cooling	air cooling	air cooling
	Length(mm)	1785	1785	1785
	Width(mm)	1107	1107	1107
	Height(mm)	1432	1432	1432
	Machine weight(kg)	1200	1300	1350

Mode		L045A-11	L055A-11	L075A-11
Machine Set	Discharge volume(m3/min)	10.5	12.55	15.5
	Discharge pressure (MPa)	0.8	0.8	0.8
	Compression level	2	2	2
	Motor power(kw)	45	55	75
	Motor speed(rpm)	1480	1480	1480
	Energy efficiency rating	Grade I	Grade I	Grade I
	Start method	soft start	soft start	soft start
	Transmission mode	direct connection	direct connection	direct connection
	Connection size	G1-1/2″	G2″	G2″
	Cooling method	air cooling	air cooling	air cooling
	Length(mm)	1785	2180	2180
	Width(mm)	1107	1350	1350
	Height(mm)	1432	1600	1600
	Machine weight(kg)	1850	2000	2150

FAQ

Q1: What’s your delivery time?
A: 15 days to produce, within 3 days if in stock.

Q2: What’s methods of payments are accepted?
A: We agree T/T ,L/C , West Union ,Money Gram ,Paypal.

Q3: What about the shipments and package?
A: 40′ container for 2 sets, 20′ container for 1 set,
Machine in nude packing, spare parts in standard export wooden box.

Q4: Have you got any certificate?
A:We have got ISO,CE certificate.

Q5: How to control the quality?
A: We will control the quality by ISO and CE requests.

Q6: Do you have after-sale service and warranty service ?
A: Yes, we have.We can supply instruction for operation and maintenance.If necessary, we can send our engineer to repair the machine in your company.
Warranty is 1 year for the machine.

Q7: Can I trust your company ?
A: Our company has been certificated by Chinese government,and verified by SGS Inspection Company.

After-sales Service:	Online
Lubrication Style:	Lubricated
Cooling System:	Air Cooling

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

How are air compressors utilized in pharmaceutical manufacturing?

Air compressors play a crucial role in pharmaceutical manufacturing, where they are utilized for various critical applications. The pharmaceutical industry requires a reliable source of clean and compressed air to ensure the safety, efficiency, and quality of its processes. Here’s an overview of how air compressors are utilized in pharmaceutical manufacturing:

1. Manufacturing Processes:

Air compressors are used in numerous manufacturing processes within the pharmaceutical industry. Compressed air is employed for tasks such as mixing and blending of ingredients, granulation, tablet compression, coating, and encapsulation of pharmaceutical products. The controlled delivery of compressed air facilitates precise and consistent manufacturing processes, ensuring the production of high-quality pharmaceuticals.

2. Instrumentation and Control Systems:

Pharmaceutical manufacturing facilities rely on compressed air for powering instrumentation and control systems. Compressed air is used to operate pneumatic valves, actuators, and control devices that regulate the flow of fluids, control temperature and pressure, and automate various processes. The clean and dry nature of compressed air makes it ideal for maintaining the integrity and accuracy of these critical control mechanisms.

3. Packaging and Filling:

Air compressors are employed in pharmaceutical packaging and filling processes. Compressed air is used to power machinery and equipment for bottle cleaning, labeling, capping, and sealing of pharmaceutical products. Compressed air provides the necessary force and precision for efficient and reliable packaging, ensuring product safety and compliance.

4. Cleanroom Environments:

Pharmaceutical manufacturing often takes place in controlled cleanroom environments to prevent contamination and maintain product quality. Air compressors are used to supply clean and filtered compressed air to these cleanrooms, ensuring a controlled and sterile environment for the production of pharmaceuticals. Compressed air is also utilized in cleanroom air showers and air curtains for personnel and material decontamination.

5. Laboratory Applications:

In pharmaceutical laboratories, air compressors are utilized for various applications. Compressed air is used in laboratory instruments, such as gas chromatographs, mass spectrometers, and other analytical equipment. It is also employed in clean air cabinets, fume hoods, and laminar flow benches, providing a controlled and clean environment for testing, analysis, and research.

6. HVAC Systems:

Air compressors are involved in heating, ventilation, and air conditioning (HVAC) systems in pharmaceutical manufacturing facilities. Compressed air powers the operation of HVAC controls, dampers, actuators, and air handling units, ensuring proper air circulation, temperature control, and environmental conditions in various manufacturing areas.

By utilizing air compressors in pharmaceutical manufacturing, the industry can maintain strict quality standards, enhance operational efficiency, and ensure the safety and efficacy of pharmaceutical products.

air compressor

How does the horsepower of an air compressor affect its capabilities?

The horsepower of an air compressor is a crucial factor that directly impacts its capabilities and performance. Here’s a closer look at how the horsepower rating affects an air compressor:

Power Output:

The horsepower rating of an air compressor indicates its power output or the rate at which it can perform work. Generally, a higher horsepower rating translates to a greater power output, allowing the air compressor to deliver more compressed air per unit of time. This increased power output enables the compressor to operate pneumatic tools and equipment that require higher air pressure or greater airflow.

Air Pressure:

The horsepower of an air compressor is directly related to the air pressure it can generate. Air compressors with higher horsepower ratings have the capacity to produce higher air pressures. This is particularly important when operating tools or machinery that require specific air pressure levels to function optimally. For example, heavy-duty pneumatic tools like jackhammers or impact wrenches may require higher air pressure to deliver the necessary force.

Air Volume:

In addition to air pressure, the horsepower of an air compressor also affects the air volume or airflow it can provide. Higher horsepower compressors can deliver greater volumes of compressed air, measured in cubic feet per minute (CFM). This increased airflow is beneficial when using pneumatic tools that require a continuous supply of compressed air, such as paint sprayers or sandblasters.

Duty Cycle:

The horsepower rating of an air compressor can also influence its duty cycle. The duty cycle refers to the amount of time an air compressor can operate continuously before it needs to rest and cool down. Higher horsepower compressors often have larger and more robust components, allowing them to handle heavier workloads and operate for longer periods without overheating. This is particularly important in demanding applications where continuous and uninterrupted operation is required.

Size and Portability:

It’s worth noting that the horsepower rating can also affect the physical size and portability of an air compressor. Higher horsepower compressors tend to be larger and heavier due to the need for more substantial motors and components to generate the increased power output. This can impact the ease of transportation and maneuverability, especially in portable or mobile applications.

When selecting an air compressor, it is essential to consider the specific requirements of your intended applications. Factors such as desired air pressure, airflow, duty cycle, and portability should be taken into account. It’s important to choose an air compressor with a horsepower rating that aligns with the demands of the tools and equipment you plan to operate, ensuring optimal performance and efficiency.

Consulting the manufacturer’s specifications and guidelines can provide valuable information on how the horsepower rating of an air compressor corresponds to its capabilities and suitability for different tasks.

air compressor

Can you explain the basics of air compressor terminology?

Understanding the basic terminology related to air compressors can help in better comprehension of their operation and discussions related to them. Here are some essential terms related to air compressors:

1. CFM (Cubic Feet per Minute): CFM is a unit of measurement that denotes the volumetric flow rate of compressed air. It indicates the amount of air a compressor can deliver within a minute and is a crucial factor in determining the compressor’s capacity.

2. PSI (Pounds per Square Inch): PSI is a unit of measurement used to quantify pressure. It represents the force exerted by the compressed air on a specific area. PSI is a vital specification for understanding the pressure capabilities of an air compressor and determining its suitability for various applications.

3. Duty Cycle: Duty cycle refers to the percentage of time an air compressor can operate in a given time period. It indicates the compressor’s ability to handle continuous operation without overheating or experiencing performance issues. For instance, a compressor with a 50% duty cycle can run for half the time in a given hour or cycle.

4. Horsepower (HP): Horsepower is a unit used to measure the power output of a compressor motor. It indicates the motor’s capacity to drive the compressor pump and is often used as a reference for comparing different compressor models.

5. Receiver Tank: The receiver tank, also known as an air tank, is a storage vessel that holds the compressed air delivered by the compressor. It helps in stabilizing pressure fluctuations, allowing for a more consistent supply of compressed air during peak demand periods.

6. Single-Stage vs. Two-Stage: These terms refer to the number of compression stages in a reciprocating air compressor. In a single-stage compressor, air is compressed in a single stroke of the piston, while in a two-stage compressor, it undergoes initial compression in one stage and further compression in a second stage, resulting in higher pressures.

7. Oil-Free vs. Oil-Lubricated: These terms describe the lubrication method used in air compressors. Oil-free compressors have internal components that do not require oil lubrication, making them suitable for applications where oil contamination is a concern. Oil-lubricated compressors use oil for lubrication, enhancing durability and performance but requiring regular oil changes and maintenance.

8. Pressure Switch: A pressure switch is an electrical component that automatically starts and stops the compressor motor based on the pre-set pressure levels. It helps maintain the desired pressure range in the receiver tank and protects the compressor from over-pressurization.

9. Regulator: A regulator is a device used to control and adjust the output pressure of the compressed air. It allows users to set the desired pressure level for specific applications and ensures a consistent and safe supply of compressed air.

These are some of the fundamental terms associated with air compressors. Familiarizing yourself with these terms will aid in understanding and effectively communicating about air compressors and their functionality.

China Custom 15kw/20HP Screw Air Compressor for Construction Works with High Efficiency air compressor price
editor by CX 2023-11-06

China Hot selling Industrial Heavy Duty Movable Portable Diesel Engine Direct Driven Rotary Screw Type Air Compressors for Construction 12v air compressor

Product Description

Model	Machine						Diesel Engine
	Free Air Delivery		Normal Working		Dimensions	Weight	Manufacturer	Model	Rated
	Free Air Delivery		Pressure		(without towbar)	Weight			power
	m3/min	CFM	bar(g)	psig	LWH(mm)	kg			KW
WZSCY-3.2/8	3.40	120	8	116	226315901543	900	Xihu (West Lake) Dis.	YSD490G	32
WZSCY-4/13	4.00	141	13	189	257018601720	1200	Cummins	QFS2.8-C60	45
WZSCY-5/7	5.55	196	7	102	257018601720	1200		QFS2.8-C60	45
WZSCY-5/10	5.00	177	10	145	257018601720	1200		QFS2.8-C60	45
WZSCY-6/7	6.00	212	7	102	257018601720	1200		QFS2.8-C60	45
WZSCY-5/13	5.31	187	13	189	312018601800	1500		QSB3.9-C80-31	60
WZSCY- 7/7	7.00	247	7	102	312018601800	1500		QSB3.9-C80-31	60
WZSCY-7/10	7.00	247	10	145	312018601800	1500		QSB3.9-C80-31	60
WZSCY-7/13	7.00	247	13	189	336025712050	1700		QSB3.9-C100-31	74
WZSCY-10/8	10.00	353	8	116	336025712050	1700		QSB3.9-C130-31	74
WZSCY-9/13	9.00	318	13	189	336025712050	1700		QSB3.9-C130-31	96
WZSCY-10/10	10.00	353	10	145	336025712050	1700		QSB3.9-C130-31	96
WZSCY-12/7	12.11	428	7	102	336025712050	1700		QSB3.9-C130-31	96
WZSCY-8/16	8.01	283	16	232	315521102295	2050		QSB5.9-C150-31	113
WZSCY-9/15	9.00	318	15	218	315521102295	2050		QSB5.9-C150-31	113
WZSCY-10/13	10.02	354	13	189	315521102295	2050		QSB5.9-C150-31	113
WZSCY-11/10	11.00	388	10	145	315521102295	2050		QSB5.9-C150-31	113
WZSCY-15/8	15.00	530	8	116	315521102295	2050		QSB5.9-C150-31	113
WZSCY-12/13	12.00	424	13	189	338817602620	3600		QSB5.9-C180-31	132
WZSCY-14/12	14.00	494	12	174	338817602620	3600		QSB5.9-C180-31	132
WZSCY-15/10	15.19	536	10	145	338817602620	3600		QSB5.9-C180-31	132
WZSCY-17/8	17.00	600	8	116	338817602620	3600		QSB5.9-C180-31	132
WZSCY18/7	18.00	636	7	102	338817602620	3600		QSB5.9-C180-31	132
WZSCY-13/18	13.55	478	18	261	340017702660	4000		QSC8.3-C215-30	160
WZSCY-13/20	13.00	459	20	290	340017702660	4000		QSC8.3-C215-30	160
WZSCY-15/16	15.00	530	16	232	340017702660	4000		QSC8.3-C215-30	160
WZSCY-17/13	17.00	600	13	189	340017702660	4000		QSC8.3-C215-30	160
WZSCY-18/10	18.00	636	10	145	340017702660	4000		QSC8.3-C215-30	160
WZSCY-23/8	23.00	812	8	116	340017702660	4000		QSC8.3-C215-30	160
WZSCY-15/18	15.00	530	18	261	340017702660	4000		QSC8.3-C260-30	194
WZSCY-17/14	17.66	624	14	203	340017702660	4000		QSC8.3-C260-30	194
WZSCY-20/13	20.67	730	13	189	340017702660	4000		QSC8.3-C260-30	194
WZSCY-22/10	22.21	784	10	145	340017702660	4000		QSC8.3-C260-30	194
WZSCY-24/8	24.00	847	8	116	340017702660	4000		QSC8.3-C260-30	194
WZSCY-18/18	18.28	645	18	261	378019802685	4400		QSL8.9-C325-30	239
WZSCY-19/14	19.75	697	14	203	378019802685	4400		QSL8.9-C325-30	239
WZSCY-20/16	20.18	713	16	232	378019802685	4400		QSL8.9-C325-30	239
WZSCY-21/15	21.00	742	15	218	378019802685	4400		QSL8.9-C325-30	239
WZSCY-23/13	23.00	812	13	189	378019802685	4400		QSL8.9-C325-30	239
WZSCY-27/10	27.00	953	10	145	378019802685	4400		QSL8.9-C325-30	239
WZSCY-28/8	28.00	989	8	116	378019802685	4400		QSL8.9-C325-30	239
WZSCY-22/20	22.00	777	20	290	396021602905	5500		QSL8.9-C360-30	264
WZSCY-23/15	23.00	812	15	218	396021602905	5500		QSL8.9-C360-30	264
WZSCY-25/13	25.00	883	13	189	396021602905	5500		QSL8.9-C360-30	264
WZSCY-26/12	26.00	918	12	174	396021602905	5500		QSL8.9-C360-30	264
WZSCY-28/10	28.00	989	10	145	396021602905	5500		QSL8.9-C360-30	264
WZSCY-32/10	32.25	1139	10	145	396021602905	5500		QSL8.9-C360-30	264
WZSCY-33/8	33.00	1165	8	116	396021602905	5500		QSL8.9-C360-30	264
WZSCY-36/7	36.00	1271	7	102	396021602905	5500		QSL8.9-C360-30	264
WZSCY-26/25	26.00	918	25	363	470021002900	4800		QSZ13-C550	410
WZSCY-34/25	34.00	1200	25	363	470021002900	6800		QSZ13-C550	410
WZSCY-45/10	46.38	1638	10	145	471521603200	7000		QSZ13-C550	410
WZSCY-33/35	33.00	1165	35	508	500022002900	7200		KTA19-P700	522
WZSCY-39/25	39.00	1377	25	363	500022002900	7200		KTA19-P700	522
Note: Skid-mounted type is available.

Wan CHINAMFG Certification

Wan CHINAMFG Exhibition

FAQ

1. OEM/ODM, or customer’ s logo printed is available?

Yes, OEM/ODM, customer’s logo is welcomed.

2. Delivery date?
Usually 5-25 working days after receiving deposit, specific delivery date based on order quantity.

3. What’s your payment terms?

Regularly doing 30% deposit and 70% balance by T/T, Western Union, Paypal, other payment terms also can be discussed based on our cooperation.

4. How to control your quality?

We have professional QC team, control the quality during the mass production and inspect the products before shipping.

5. If we don’ t have shipping forwarder in China , would you do this for us?

We can offer you best shipping line to ensure you can get the goods timely at best price.

6. I never come to China before , can you be my guide in China?

Sure , I’m glad to be your guide because our company directly located in ZheJiang , where is the most famous city in China, if you want to come China then we are happy to provide you one-stop service, such as booking ticket, picking up at the airport, booking hotel, accompany visiting factory. It gonna make you an unforgettable memory.

MARKETING NETWORK

After-sales Service:	Video Technical Support
Warranty:	Unit 1 Year, Air End 2 Years
Lubrication Style:	Oil-less

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

What is the role of air compressors in power generation?

Air compressors play a significant role in power generation, supporting various operations and equipment within the industry. Here are some key roles of air compressors in power generation:

1. Combustion Air Supply:

Air compressors are used to supply compressed air for the combustion process in power generation. In fossil fuel power plants, such as coal-fired or natural gas power plants, compressed air is required to deliver a steady flow of air to the burners. The compressed air helps in the efficient combustion of fuel, enhancing the overall performance and energy output of the power plant.

2. Instrumentation and Control:

Air compressors are utilized for instrumentation and control systems in power generation facilities. Compressed air is used to operate pneumatic control valves, actuators, and other pneumatic devices that regulate the flow of steam, water, and gases within the power plant. The reliable and precise control provided by compressed air ensures efficient and safe operation of various processes and equipment.

3. Cooling and Ventilation:

In power generation, air compressors are involved in cooling and ventilation applications. Compressed air is used to drive air-operated cooling fans and blowers, providing adequate airflow for cooling critical components such as generators, transformers, and power electronics. The compressed air also assists in maintaining proper ventilation in control rooms, substations, and other enclosed spaces, helping to dissipate heat and ensure a comfortable working environment.

4. Cleaning and Maintenance:

Air compressors are employed for cleaning and maintenance tasks in power generation facilities. Compressed air is utilized to blow away dust, dirt, and debris from equipment, machinery, and electrical panels. It helps in maintaining the cleanliness and optimal performance of various components, reducing the risk of equipment failure and improving overall reliability.

5. Pneumatic Tools and Equipment:

In power generation plants, air compressors provide the necessary compressed air for operating pneumatic tools and equipment. These tools include impact wrenches, pneumatic drills, grinders, and sandblasting equipment, which are utilized for installation, maintenance, and repair tasks. The high-pressure air generated by compressors enables efficient and reliable operation of these tools, enhancing productivity and reducing manual effort.

6. Nitrogen Generation:

Sometimes, air compressors are used in power generation for nitrogen generation. Compressed air is passed through a nitrogen generator system, which separates nitrogen from other components of air, producing a high-purity nitrogen gas stream. Nitrogen is commonly used in power plant applications, such as purging systems, blanketing in transformers, and generator cooling, due to its inert properties and low moisture content.

7. Start-up and Emergency Systems:

Air compressors are an integral part of start-up and emergency systems in power generation. Compressed air is utilized to power pneumatic starters for gas turbines, providing the initial rotation needed to start the turbine. In emergency situations, compressed air is also used to actuate emergency shutdown valves, safety systems, and fire suppression equipment, ensuring the safe operation and protection of the power plant.

Overall, air compressors contribute to the efficient and reliable operation of power generation facilities, supporting combustion processes, control systems, cooling, cleaning, and various other applications critical to the power generation industry.

air compressor

How are air compressors used in refrigeration and HVAC systems?

Air compressors play a vital role in refrigeration and HVAC (Heating, Ventilation, and Air Conditioning) systems, providing the necessary compression of refrigerant gases and facilitating the heat transfer process. Here are the key ways in which air compressors are used in refrigeration and HVAC systems:

1. Refrigerant Compression:

In refrigeration systems, air compressors are used to compress the refrigerant gas, raising its pressure and temperature. This compressed gas then moves through the system, where it undergoes phase changes and heat exchange to enable cooling or heating. The compressor is the heart of the refrigeration cycle, as it pressurizes and circulates the refrigerant.

2. Refrigeration Cycle:

The compression of refrigerant gas by the air compressor is an essential step in the refrigeration cycle. After compression, the high-pressure, high-temperature gas flows to the condenser, where it releases heat and condenses into a liquid. The liquid refrigerant then passes through an expansion valve or device, which reduces its pressure and temperature. This low-pressure, low-temperature refrigerant then enters the evaporator, absorbing heat from the surrounding environment and evaporating back into a gas. The cycle continues as the gas returns to the compressor for re-compression.

3. HVAC Cooling and Heating:

In HVAC systems, air compressors are used to facilitate cooling and heating processes. The compressor compresses the refrigerant gas, which allows it to absorb heat from the indoor environment in the cooling mode. The compressed gas releases heat in the outdoor condenser unit and then circulates back to the compressor to repeat the cycle. In the heating mode, the compressor reverses the refrigeration cycle, absorbing heat from the outdoor air or ground source and transferring it indoors.

4. Air Conditioning:

Air compressors are an integral part of air conditioning systems, which are a subset of HVAC systems. Compressed refrigerant gases are used to cool and dehumidify the air in residential, commercial, and industrial buildings. The compressor pressurizes the refrigerant, initiating the cooling cycle that removes heat from the indoor air and releases it outside.

5. Compressor Types:

Refrigeration and HVAC systems utilize different types of air compressors. Reciprocating compressors, rotary screw compressors, and scroll compressors are commonly used in these applications. The selection of the compressor type depends on factors such as system size, capacity requirements, efficiency, and application-specific considerations.

6. Energy Efficiency:

Efficient operation of air compressors is crucial for refrigeration and HVAC systems. Energy-efficient compressors help minimize power consumption and reduce operating costs. Additionally, proper compressor sizing and system design contribute to the overall energy efficiency of refrigeration and HVAC systems.

By effectively compressing refrigerant gases and facilitating the heat transfer process, air compressors enable the cooling and heating functions in refrigeration and HVAC systems, ensuring comfortable indoor environments and efficient temperature control.

air compressor

Are there portable air compressors available for home use?

Yes, there are portable air compressors specifically designed for home use. These portable models offer convenience, versatility, and ease of use for various tasks around the house. Here are some key points about portable air compressors for home use:

1. Compact and Lightweight: Portable air compressors are typically compact and lightweight, making them easy to transport and store. They are designed with portability in mind, allowing homeowners to move them around the house or take them to different locations as needed.

2. Electric-Powered: Most portable air compressors for home use are electric-powered. They can be plugged into a standard household electrical outlet, eliminating the need for gasoline or other fuel sources. This makes them suitable for indoor use without concerns about emissions or ventilation.

3. Versatile Applications: Portable air compressors can be used for a wide range of home applications. They are commonly used for inflating tires, sports equipment, and inflatable toys. They are also handy for operating pneumatic tools such as nail guns, staplers, and paint sprayers. Additionally, portable air compressors can be used for cleaning tasks, powering airbrushes, and other light-duty tasks around the house.

4. Pressure and Capacity: Portable air compressors for home use typically have lower pressure and capacity ratings compared to larger industrial or commercial models. They are designed to meet the needs of common household tasks rather than heavy-duty applications. The pressure and capacity of these compressors are usually sufficient for most home users.

5. Oil-Free Operation: Many portable air compressors for home use feature oil-free operation. This means they do not require regular oil changes or maintenance, making them more user-friendly and hassle-free for homeowners.

6. Noise Level: Portable air compressors designed for home use often prioritize low noise levels. They are engineered to operate quietly, reducing noise disturbances in residential environments.

7. Cost: Portable air compressors for home use are generally more affordable compared to larger, industrial-grade compressors. They offer a cost-effective solution for homeowners who require occasional or light-duty compressed air applications.

When considering a portable air compressor for home use, it’s important to assess your specific needs and tasks. Determine the required pressure, capacity, and features that align with your intended applications. Additionally, consider factors such as portability, noise level, and budget to choose a suitable model that meets your requirements.

Overall, portable air compressors provide a practical and accessible compressed air solution for homeowners, allowing them to tackle a variety of tasks efficiently and conveniently within a home setting.

China Hot selling Industrial Heavy Duty Movable Portable Diesel Engine Direct Driven Rotary Screw Type Air Compressors for Construction 12v air compressor
editor by CX 2023-11-03

China manufacturer 100HP 75kw Remote Control Stationary Rotary Twin Screw Air Oil Injected Compressor Manufacturer for Chemical air compressor portable

Product Description

100HP 75KW remote control stationary rotary twin screw air oil injected compressor manufacturer for chemical

Technical Parameters Of PM Variable speed screw air compressor:

Model	WZS-100EVA
Air Flow/Working pressure	13.2m3/min @ 8bar
Air Flow/Working pressure	11.6m3/min @ 10bar
Cooling type of COMPRESSOR	Air cooling
Cooling type of MOTOR	Air cooling
Driven method	Direct Driven
Start way	Soft VSD Start
VSD inverter	HOLIP / VEICHI
Exhaust Temp.	< ambient temp. +8 degrees
Oil content	<2ppm
Noise	70±2 dB(A)
Power	380VAC/3ph/0~200Hz
Motor power	75kw/100hp
Dimension	215013001700mm
Weight	1950kg

Model	Power (KW)	Pressure (Bar)	Air flow (m³/min)	Noise dB(A)	Compression stages	Outlet diameter (Inch)	Dimension (mm)			Weight (kg)
							L	W	H
WZS-15EVA	11	8	1.8	62±2	Single	1″	1300	860	1030	380
		10	1.6
WZS-20EVA	15	8	2.2	63±2	Single	1″	1300	860	1030	480
		10	2.0
WZS-30EVA	22	8	3.8	66±2	Single	1¼”	1380	850	1150	620
		10	3.0
WZS-40EVA	30	8	5.0	68±2	Single	1¾”	1380	850	1150	680
		10	4.4
WZS-50EVA	37	8	6.8	68±2	Single	1½”	1600	1000	1370	850
		10	5.4
WZS-60EVA	45	8	8.0	68±2	Single	1½”	1600	1000	1370	880
		10	6.8
WZS-75EVA	55	8	9.7	69±2	Single	2″	1700	1270	1500	1350
		10	8.6
WZS-100EVA	75	8	13.2	70±2	Single	2″	2150	1300	1700	1650
		10	11.6
WZS-125EVA	90	8	15.0	70±2	Single	2″	2150	1100	1500	1950
		10	14.6
WZS-150EVA	110	8	19.0	71±2	Single	DN65	2550	1650	1850	2600
		10	17.0
WZS-180EVA	132	8	23.0	72±2	Single	DN65	2550	1650	1850	2880
		10	20.0
WZS-200EVA	160	8	26.5	75±2	Single	DN80	2950	1800	1850	3200
		10	22.5

Before quotation:
1.Before quoting, what should users offer?
1).Discharge pressure (Bar, Mpa or Psi)
2).Air discharge/Air flow/Air capacity (m3/min or CFM)
3).Power supply (220/380V, 50/60Hz, 3Phase)

2.If I don’t know the pressure and air flow, what should I do?
1).Take the picture of nameplate, we will advise the suitable air compressor to you.
2).Tell us what industry you are, we can advise the suitable 1 (so as to air tank / air dryer / air filters).

High Efficiency PM Motor and Energy Saving
*With the high-performance permanent magnet material, PM motor won’t lose magnetism even under 120°c and can run for more than 15 years.
*No motor bearing: permanent magnet rotors is installed directly on the stretch out shaft of Male rotor. This structure doesn’t have the bearing and eliminates the motor bearing fault.
*Comparing to normal variable speed motor, the permanent magnet synchronous motor performs with even better energy efficiency. Especially in the low-speed condition, it can still maintain a high motor efficiency.

SHIPPING
Delivery: time 5-25 working days after payment receipt confirmed(based on actual quantity)
packing:standard export packing. or customized packing as your
Professional: goods shipping forwarder.

FAQ
Q: OEM/ODM, or customers logo printed is available?
Yes, OEM/ODM, customers logo is welcomed.

Q: Delivery date?
Usually 5-25 workdays after receiving deposit, specific delivery date based on order quantity

Q: what’s your payment terms?
Regularly doing 30% deposit and 70% balance by T/T, Western Union, Paypal, otherpayment terms also can be discussed based on our cooperation.

Q: How to control your quality?
We have professional QC team, control the quality during the mass production and inspectthe completely goods before shipping.

Q: If we don’t have shipping forwarder in China, would you do this for us?
We can offer you best shipping line to ensure you can get the goods timely at best price.

Q: come to China before, can you be my guide in China?
We are happy to provide you orservice, such as booking ticket, pick up at the airport, booking hotel, accompany visiting market or factory

Thank you very much for viewing this page, and wish you a nice day!

Contacts:Vicky Liu
Mob: -173-1655-1856
Web: compressor

Lubrication Style:	Oil-less
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical
Structure Type:	Closed Type
Installation Type:	Stationary Type

Customization:	Available \|

air compressor

What are the advantages of using rotary vane compressors?

Rotary vane compressors offer several advantages that make them a popular choice for various applications. These compressors are widely used in industries where a reliable and efficient source of compressed air is required. Here are the advantages of using rotary vane compressors:

1. Compact and Lightweight:

Rotary vane compressors are typically compact and lightweight compared to other types of compressors. Their compact design makes them suitable for installations where space is limited, such as in small workshops or mobile applications. The lightweight nature of these compressors allows for easy transportation and maneuverability.

2. High Efficiency:

Rotary vane compressors are known for their high efficiency. The design of the vanes and the compression chamber allows for smooth and continuous compression, resulting in minimal energy losses. This efficiency translates into lower energy consumption and reduced operating costs over time.

3. Quiet Operation:

Rotary vane compressors operate with relatively low noise levels. The design of the compressor, including the use of vibration damping materials and sound insulation, helps to minimize noise and vibrations during operation. This makes rotary vane compressors suitable for applications where noise reduction is important, such as in indoor environments or noise-sensitive areas.

4. Oil Lubrication:

Many rotary vane compressors utilize oil lubrication, which provides several benefits. The oil lubrication helps to reduce wear and friction between the moving parts, resulting in extended compressor life and improved reliability. It also contributes to better sealing and improved efficiency by minimizing internal leakage.

5. Versatile Applications:

Rotary vane compressors are versatile and can be used in a wide range of applications. They are suitable for both industrial and commercial applications, including automotive workshops, small manufacturing facilities, dental offices, laboratories, and more. They can handle various compressed air requirements, from light-duty tasks to more demanding applications.

6. Easy Maintenance:

Maintenance of rotary vane compressors is relatively straightforward. Routine maintenance tasks typically include oil changes, filter replacements, and periodic inspection of vanes and seals. The simplicity of the design and the availability of replacement parts make maintenance and repairs easier and more cost-effective.

These advantages make rotary vane compressors an attractive choice for many applications, providing reliable and efficient compressed air solutions.

air compressor

What safety precautions should be taken when working with compressed air?

Working with compressed air requires adherence to certain safety precautions to prevent accidents and ensure the well-being of individuals involved. Here are some important safety measures to consider:

1. Personal Protective Equipment (PPE):

Wear appropriate PPE, including safety goggles or a face shield to protect eyes from flying debris or particles, hearing protection to reduce noise exposure, and gloves to safeguard hands from potential hazards.

2. Compressed Air Storage:

Avoid storing compressed air in containers that are not designed for this purpose, such as soda bottles or makeshift containers. Use approved and properly labeled air storage tanks or cylinders that can handle the pressure and are regularly inspected and maintained.

3. Pressure Regulation:

Ensure that the air pressure is regulated to a safe level suitable for the equipment and tools being used. High-pressure air streams can cause serious injuries, so it is important to follow the manufacturer’s recommendations and never exceed the maximum allowable pressure.

4. Air Hose Inspection:

Regularly inspect air hoses for signs of damage, such as cuts, abrasions, or leaks. Replace damaged hoses immediately to prevent potential accidents or loss of pressure.

5. Air Blowguns:

Exercise caution when using air blowguns. Never direct compressed air towards yourself or others, as it can cause eye injuries, hearing damage, or dislodge particles that may be harmful if inhaled. Always point blowguns away from people or any sensitive equipment or materials.

6. Air Tool Safety:

Follow proper operating procedures for pneumatic tools. Ensure that tools are in good working condition, and inspect them before each use. Use the appropriate accessories, such as safety guards or shields, to prevent accidental contact with moving parts.

7. Air Compressor Maintenance:

Maintain air compressors according to the manufacturer’s guidelines. Regularly check for leaks, clean or replace filters, and drain moisture from the system. Proper maintenance ensures the safe and efficient operation of the compressor.

8. Training and Education:

Provide adequate training and education to individuals working with compressed air. Ensure they understand the potential hazards, safe operating procedures, and emergency protocols. Encourage open communication regarding safety concerns and implement a culture of safety in the workplace.

9. Lockout/Tagout:

When performing maintenance or repairs on compressed air systems, follow lockout/tagout procedures to isolate the equipment from energy sources and prevent accidental startup. This ensures the safety of the individuals working on the system.

10. Proper Ventilation:

Ensure proper ventilation in enclosed areas where compressed air is used. Compressed air can displace oxygen, leading to a potential risk of asphyxiation. Adequate ventilation helps maintain a safe breathing environment.

By adhering to these safety precautions, individuals can minimize the risks associated with working with compressed air and create a safer work environment.

air compressor

What is the role of air compressor tanks?

Air compressor tanks, also known as receiver tanks or air receivers, play a crucial role in the operation of air compressor systems. They serve several important functions:

1. Storage and Pressure Regulation: The primary role of an air compressor tank is to store compressed air. As the compressor pumps air into the tank, it accumulates and pressurizes the air. The tank acts as a reservoir, allowing the compressor to operate intermittently while providing a steady supply of compressed air during periods of high demand. It helps regulate and stabilize the pressure in the system, reducing pressure fluctuations and ensuring a consistent supply of air.

2. Condensation and Moisture Separation: Compressed air contains moisture, which can condense as the air cools down inside the tank. Air compressor tanks are equipped with moisture separators or drain valves to collect and remove this condensed moisture. The tank provides a space for the moisture to settle, allowing it to be drained out periodically. This helps prevent moisture-related issues such as corrosion, contamination, and damage to downstream equipment.

3. Heat Dissipation: During compression, air temperature increases. The air compressor tank provides a larger surface area for the compressed air to cool down and dissipate heat. This helps prevent overheating of the compressor and ensures efficient operation.

4. Pressure Surge Mitigation: Air compressor tanks act as buffers to absorb pressure surges or pulsations that may occur during compressor operation. These surges can be caused by variations in demand, sudden changes in airflow, or the cyclic nature of reciprocating compressors. The tank absorbs these pressure fluctuations, reducing stress on the compressor and other components, and providing a more stable and consistent supply of compressed air.

5. Energy Efficiency: Air compressor tanks contribute to energy efficiency by reducing the need for the compressor to run continuously. The compressor can fill the tank during periods of low demand and then shut off when the desired pressure is reached. This allows the compressor to operate in shorter cycles, reducing energy consumption and minimizing wear and tear on the compressor motor.

6. Emergency Air Supply: In the event of a power outage or compressor failure, the stored compressed air in the tank can serve as an emergency air supply. This can provide temporary air for critical operations, allowing time for maintenance or repairs to be carried out without disrupting the overall workflow.

Overall, air compressor tanks provide storage, pressure regulation, moisture separation, heat dissipation, pressure surge mitigation, energy efficiency, and emergency backup capabilities. They are vital components that enhance the performance, reliability, and longevity of air compressor systems in various industrial, commercial, and personal applications.

China manufacturer 100HP 75kw Remote Control Stationary Rotary Twin Screw Air Oil Injected Compressor Manufacturer for Chemical air compressor portable
editor by CX 2023-11-02

China manufacturer Oil Injected Direct Driven Screw Air Compressor for Rice Packing in Russia air compressor parts

Product Description

0.5-80 M3/Min 6-40 Bar 5.5-400 Kw Electrical Stationary Industrial AC Power Direct Driven/Coupled Rotary Screw Air Compressors Advantages

1.DENAIR Enhanced energy saving screw air compressor reached the super energy saving level

2.Energy Efficient Index 1(EEI 1) approved according to GB19153-2009, the energy consumption is 10%~15% lower than EEI 2.

3.CHINAMFG air compressor design with 72 types of technology patent, real bigger air flow

4.State-of-the-art screw element, original Germany CHINAMFG air end, ladvanced SAP profile design, superior Sweden CHINAMFG element bearings

5.CHINAMFG air compressdor dopts world-renowned components, such as Schneider electronics from France, DENAIR filters from Germany, Danfoss pressure sensor from Denmark, etc. contribute to guarantee the compressor longer service life.

6.Smart touch screen design and 0 pressure drop design

7.Higher efficiency cooling system and electrical motor

8.Stainless steel pipes, reasonable inner design, ensure long service life without maintenance.

Technical Parameters Of Energy Saving Rotary Screw Air Compressor

Model	Maxinmum working		Capacity(FAD)*				Installed motor power		Driving mode&	Noise	Dimensions(mm)			Weight	Air outlet
	pressure		50 HZ		60 HZ		Installed motor power		Cooling method	level**	Dimensions(mm)			Weight	pipe diameter
	bar(g)	psig	m3/min	cfm	m3/min	cfm	kw	hp		dB(A)	L	W	H	kg
DA-5	7.5	109	0.80	28	0.80	28	5.5	7.5	Belt Driven	75	900	600	860	315	G3/4″
DA-5	8.5	123	0.78	28	0.78	28	5.5	7.5	Air Cooling	75	900	600	860	315	G3/4″
DA-7	7.5	109	1.09	39	1.09	39	7.5	10		75	900	600	860	315	G3/4″
	8.5	123	1.07	38	1.07	38	7.5	10		75	900	600	860
	10.5	152	0.92	32	0.91	32	7.5	10		75	900	600	860
	13.0	189	0.73	26	0.72	26	7.5	10		75	900	600	860
DA-11	7.5	109	1.66	59	1.66	59	11	15		75	1230	650	900	324	G3/4″
	8.5	123	1.64	58	1.64	58	11	15		75	1230	650	900
	10.5	152	1.45	51	1.45	51	11	15		75	1230	650	900
	13.0	189	1.13	40	1.12	40	11	15		75	1230	650	900
DA-15	7.5	109	2.54	90	2.53	89	15	20	Direct Driven	75	1465	990	1345	453	G1-1/4″
	8.5	123	2.51	88	2.50	88	15	20	Air Cooling	75	1465	990	1345
	10.5	152	1.97	70	1.86	66	15	20		75	1465	990	1345
	13.0	189	1.91	67	1.83	65	15	20		75	1465	990	1345
DA-18	7.5	109	3.04	107	3.65	129	18.5	25		75	1465	990	1345	453	G1-1/4″
	8.5	123	3.03	107	3.63	128	18.5	25		75	1465	990	1345
	10.5	152	3.00	106	2.38	84	18.5	25		75	1465	990	1345
	13.0	189	1.91	67	2.36	83	18.5	25		75	1465	990	1345
DA-22	7.5	109	3.57	126	3.65	129	22	30		75	1465	990	1345	477	G1-1/4″
	8.5	123	3.55	125	3.63	128	22	30		75	1465	990	1345
	10.5	152	3.00	106	2.38	84	22	30		75	1465	990	1345
	13.0	189	2.97	105	2.36	83	22	30		75	1465	990	1345
DA-30	7.5	109	5.28	187	4.49	159	30	40		85	1600	1250	1550	682	G1-1/2″
	8.5	123	5.26	186	4.48	158	30	40		85	1600	1250	1550
	10.5	152	5.21	184	4.47	158	30	40		85	1600	1250	1550
	13.0	189	3.45	122	3.58	126	30	40		85	1600	1250	1550
DA-37	7.5	109	6.54	231	6.33	224	37	50		85	1600	1250	1550	728	G1-1/2″
	8.5	123	6.52	230	6.30	222	37	50		85	1600	1250	1550
	10.5	152	5.21	184	4.47	158	37	50		85	1600	1250	1550
	13.0	189	5.16	182	4.43	156	37	50		85	1600	1250	1550
DA-45	7.5	109	7.67	271	7.79	275	45	60		85	1600	1250	1550	728	G1-1/2″
	8.5	123	7.62	269	7.76	574	45	60		85	1600	1250	1550
	10.5	152	6.46	228	6.24	220	45	60		85	1600	1250	1550
	13.0	189	6.41	226	4.44	157	45	60		85	1600	1250	1550
DA-55	7.5	109	9.76	345	9.14	323	55	75		85	1876	1326	1700	1310	G2″
	8.5	123	9.67	342	9.06	320	55	75		85	1876	1326	1700
	10.5	152	7.53	266	7.74	273	55	75		85	1876	1326	1700
	13.0	189	7.40	261	6.30	222	55	75		85	1876	1326	1700
DA-75	7.5	109	14.21	502	11.72	414	75	100		85	1876	1326	1700	1325	G2″
	8.5	123	12.55	443	11.63	411	75	100		85	1876	1326	1700
	10.5	152	9.51	336	11.43	404	75	100		85	1876	1326	1700
	13.0	189	9.23	326	8.75	309	75	100		85	1876	1326	1700
DA-90(W)	7.5	109	16.62	587	17.01	601	90	120	Direct Driven	72	2450	1800	1700	2450	DN80
	8.5	123	16.37	578	16.82	594	90	120	Air Cooling Or	72	2450	1800	1700
	10.5	152	14.21	502	14.87	525	90	120	Water Cooling	72	2450	1800	1700
	13.0	189	11.77	416	11.27	398	90	120		72	2450	1800	1700
DA-110(W)	7.5	109	20.13	711	19.10	674	110	150		72	2450	1800	1700	2500	DN80
	8.5	123	20.05	708	19.06	673	110	150		72	2450	1800	1700
	10.5	152	16.33	576	17.01	601	110	150		72	2450	1800	1700
	13.0	189	14.11	498	14.68	518	110	150		72	2450	1800	1700
DA-132(W)	7.5	109	22.85	807	24.37	861	132	175		72	2450	1800	1700	2600	DN80
	8.5	123	22.73	802	24.23	856	132	175		72	2450	1800	1700
	10.5	152	19.88	702	18.95	669	132	175		72	2450	1800	1700
	13.0	189	16.51	583	16.82	594	132	175		72	2450	1800	1700
DA-160(W)	7.5	109	26.92	950	27.90	985	160	215		78	2650	1700	1850	3200	DN80
	8.5	123	26.86	949	27.76	980	160	215		78	2650	1700	1850
	10.5	152	22.44	792	23.97	846	160	215		78	2650	1700	1850
	13.0	189	19.63	693	18.82	664	160	215		78	2650	1700	1850
DA-185(W)	7.5	109	28.89	1571	30.53	1078	185	250		78	2650	1700	1850	3300	DN80
	8.5	123	28.84	1018	30.44	1075	185	250		78	2650	1700	1850
	10.5	152	25.11	886	27.46	970	185	250		78	2650	1700	1850
	13.0	189	22.08	780	23.69	836	185	250		78	2650	1700	1850
DA-200(W)	7.5	109	31.88	1126	30.53	1078	200	270		80	3000	1950	2030	4750	DN100
	8.5	123	31.82	1124	30.44	1075	200	270		80	3000	1950	2030
	10.5	152	28.48	1006	30.22	1067	200	270		80	3000	1950	2030
	13.0	189	25.00	883	27.07	956	200	270		80	3000	1950	2030
DA-220(W)	7.5	109	36.20	1278	37.22	1314	220	300		80	3000	1950	2030	4800	DN100
	8.5	123	36.15	1276	37.17	1312	220	300		80	3000	1950	2030
	10.5	152	31.71	1120	33.25	1174	220	300		80	3000	1950	2030
	13.0	189	28.48	1006	27.07	956	220	300		80	3000	1950	2030
DA-250(W)	7.5	109	43.31	1529	42.87	1514	250	350		80	3000	1950	2030	4850	DN100
	8.5	123	43.24	1527	41.30	1458	250	350		80	3000	1950	2030
	10.5	152	36.03	1272	37.04	1308	250	350		80	3000	1950	2030
	13.0	189	31.55	1114	33.15	1170	250	350		80	3000	1950	2030
DA-280(W)	7.5	109	46.59	1645	47.16	1665	280	375		85	3700	2300	2450	5200	DN125
	8.5	123	46.53	1643	45.64	1612	280	375		85	3700	2300	2450
	10.5	152	42.95	1516	42.56	1503	280	375		85	3700	2300	2450
	13.0	189	35.89	1267	36.95	1305	280	375		85	3700	2300	2450
DA-315(W)	7.5	109	53.16	1877	50.88	1797	315	425		85	3700	2300	2450	6000	DN125
	8.5	123	52.63	1858	50.83	1795	315	425		85	3700	2300	2450
	10.5	152	43.05	1520	46.27	1634	315	425		85	3700	2300	2450
	13.0	189	42.93	1516	40.32	1424	315	425		85	3700	2300	2450
DA-355(W)	7.5	109	63.37	2238	58.12	2052	355	475		85	4500	2500	2450	7000	DN125
	8.5	123	63.16	2230	56.54	1997	355	475		85	4500	2500	2450
	10.5	152	52.63	1858	51.57	1821	355	475		85	4500	2500	2450
	13.0	189	43.79	1546	45.35	1601	355	475		85	4500	2500	2450
DA-400(W)	7.5	109	70.99	2507	61.72	2179	400	550		85	4500	2500	2450	8000	DN125
	8.5	123	70.64	2494	59.72	2109	400	550		85	4500	2500	2450
	10.5	152	52.63	1858	56.52	1996	400	550		85	4500	2500	2450
	13.0	189	46.34	1636	51.35	1813	400	550		85	4500	2500	2450

*) FAD in accordance with ISO 1217 : 2009, Annex C: Absolute intake pressure 1 bar (a), cooling and air intake temperature 20 °C
**) Noise level as per ISO 2151 and the basic standard ISO 9614-2, operation at maximum operating pressure and maximum speed; tolerance: ± 3 dB(A)
***) EEI 1- Energy Effiency Index 1, which refers to enhanced energy saving series
Specifications are subject to change without notice.

DENAIR Factory & Product Lines

DENAIR Exhibition

We carefully selected for you the classic case

Enhanced Energy Saving Air Compressor in Oman

Project Name: Sandblasting in Muscat, Oman.

Product Name: 75KW 100HP Enhanced Energy Saving screw air compressor EEI 1 (Energy Efficiency Index 1) with air dryer, air receiver tank and air filters.

Model No. & Qty: DA-75+ x 1.

Working Time: From June, 2016 till now

Event: In June, 2015, 1 set of CHINAMFG enhanced energy saving air compressor system was installed in Muscat Oman. This is the first project finished by CHINAMFG distributor in Oman. Our partner Mr. Hari shared the photos at working site to us as a good starting. That means more and more CHINAMFG energy saving solutions will contribute to the industries in Oman in the near future. CHINAMFG air compressor factory and air compressor distributor will try the best to provide top quality products, cost effective solution and excellent service for local users in Oman. In order to ensure the most professional service, the distributor plans to send 2 service engineers to CHINAMFG factory in ZheJiang for training and learnin. We will update the news at that time.

FAQ

Q1: Are you factory or trade company?
A1: We are factory.

Q2: What the exactly address of your factory?
A2:No. 366, YangzhuangBang Street, Pingxing Rd., Xindai Town, HangZhou, ZHangZhoug Province, China
.
Q3: Warranty terms of your air compressor machine?
A3: Two years warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts of the air compressor?
A4: Yes, of course.

Q5: How long will you take to arrange production?
A5: 380V 50HZ we can delivery the goods within 10 days. Other electricity or other color we will delivery within 22 days

Q6: Can you accept OEM orders?
A6: Yes, with professional design team, OEM orders are highly welcome.

Power Source:	AC Power
Cylinder Position:	Vertical
Structure Type:	Closed Type

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

How are air compressors utilized in pharmaceutical manufacturing?

1. Manufacturing Processes:

2. Instrumentation and Control Systems:

3. Packaging and Filling:

4. Cleanroom Environments:

5. Laboratory Applications:

6. HVAC Systems:

air compressor

How do you troubleshoot common air compressor problems?

Troubleshooting common air compressor problems can help identify and resolve issues that may affect the performance and functionality of the compressor. Here are some steps to troubleshoot common air compressor problems:

1. No Power:

Check the power source and ensure the compressor is properly plugged in.
Inspect the circuit breaker or fuse box to ensure it hasn’t tripped or blown.
Verify that the compressor’s power switch or control panel is turned on.

2. Low Air Pressure:

Check the air pressure gauge on the compressor. If the pressure is below the desired level, the compressor might not be building up enough pressure.
Inspect for air leaks in the system. Leaks can cause a drop in pressure. Listen for hissing sounds or use a soapy water solution to identify the location of leaks.
Ensure the compressor’s intake filter is clean and not clogged, as this can restrict airflow and reduce pressure.

3. Excessive Noise or Vibration:

Inspect the compressor’s mounting and foundation to ensure it is secure and stable. Loose mounts can cause excessive noise and vibration.
Check for loose or damaged components, such as belts, pulleys, or motor mounts. Tighten or replace as necessary.
Verify that the compressor’s cooling system, such as the fan or fins, is clean and free from obstructions. Overheating can lead to increased noise and vibration.

4. Air Leaks:

Inspect all connections, valves, fittings, and hoses for leaks. Tighten or replace any loose or damaged components.
Apply a soapy water solution to suspected areas and look for bubbles. Bubbles indicate air leaks.
Consider using thread sealant or Teflon tape on threaded connections to ensure a proper seal.

5. Excessive Moisture in Compressed Air:

Check the compressor’s drain valve and ensure it is functioning properly. Open the valve to release any accumulated moisture.
Inspect and clean the compressor’s moisture separator or air dryer, if equipped.
Consider installing additional filtration or drying equipment to remove moisture from the compressed air system.

6. Motor Overheating:

Ensure the compressor’s cooling system is clean and unobstructed.
Check the motor’s air intake vents and clean any dust or debris that may be blocking airflow.
Verify that the compressor is not being operated in an excessively hot environment.
Check the motor’s lubrication levels and ensure they are within the manufacturer’s recommended range.
Consider using a thermal overload protector to prevent the motor from overheating.

If troubleshooting these common problems does not resolve the issue, it may be necessary to consult the manufacturer’s manual or seek assistance from a qualified technician. Regular maintenance, such as cleaning, lubrication, and inspection, can also help prevent common problems and ensure the optimal performance of the air compressor.

air compressor

What maintenance is required for air compressors?

Maintaining air compressors is essential to ensure their optimal performance, longevity, and safe operation. Regular maintenance helps prevent breakdowns, improves efficiency, and reduces the risk of accidents. Here are some key maintenance tasks for air compressors:

1. Regular Inspection: Perform visual inspections of the air compressor to identify any signs of wear, damage, or leaks. Inspect the compressor, hoses, fittings, and connections for any abnormalities. Pay attention to oil leaks, loose bolts, and worn-out components.

2. Oil Changes: If your air compressor has an oil lubrication system, regular oil changes are crucial. Follow the manufacturer’s recommendations for the frequency of oil changes and use the recommended oil type. Dirty or degraded oil can impact compressor performance and lead to premature wear.

3. Air Filter Cleaning or Replacement: Clean or replace the air filter regularly to ensure proper air intake and prevent contaminants from entering the compressor. Clogged or dirty filters can restrict airflow and reduce efficiency.

4. Drain Moisture: Air compressors produce moisture as a byproduct of the compression process. Accumulated moisture in the tank can lead to rust and corrosion. Drain the moisture regularly from the tank to prevent damage. Some compressors have automatic drains, while others require manual draining.

5. Belt Inspection and Adjustment: If your compressor has a belt-driven system, inspect the belts for signs of wear, cracks, or tension issues. Adjust or replace the belts as necessary to maintain proper tension and power transmission.

6. Tank Inspection: Inspect the compressor tank for any signs of corrosion, dents, or structural issues. A damaged tank can be hazardous and should be repaired or replaced promptly.

7. Valve Maintenance: Check the safety valves, pressure relief valves, and other valves regularly to ensure they are functioning correctly. Test the valves periodically to verify their proper operation.

8. Motor and Electrical Components: Inspect the motor and electrical components for any signs of damage or overheating. Check electrical connections for tightness and ensure proper grounding.

9. Keep the Area Clean: Maintain a clean and debris-free area around the compressor. Remove any dirt, dust, or obstructions that can hinder the compressor’s performance or cause overheating.

10. Follow Manufacturer’s Guidelines: Always refer to the manufacturer’s manual for specific maintenance instructions and recommended service intervals for your air compressor model. They provide valuable information on maintenance tasks, lubrication requirements, and safety precautions.

Regular maintenance is vital to keep your air compressor in optimal condition and extend its lifespan. It’s also important to note that maintenance requirements may vary depending on the type, size, and usage of the compressor. By following a comprehensive maintenance routine, you can ensure the reliable operation of your air compressor and maximize its efficiency and longevity.

China manufacturer Oil Injected Direct Driven Screw Air Compressor for Rice Packing in Russia air compressor parts
editor by CX 2023-10-30

China wholesaler 11kw High Quality 16bar Combined Laser Cutting Screw Air Compressor with Air Tank and Air Dryer for Sandblasting air compressor for sale

Product Description

11kw High Quality 16bar Combined Laser Cutting Screw Air Compressor with Air Tank and Air Dryer for Sandblasting

Model:DBZY-15A
Air delivery :1.05m³/min
Working pressure 16bar
Control: PLC controler
Driven: Belt driven
Cooling: By air
Electric motor: 11KW 15hp 380v/50hz/3phase, IP54
Discharge temperature: Ambient +10~15ºC
Air outlet size: G3/4″
Air dryer: 220v/50/1phase, 1.2m³/min
Dimension: 1882*790*1731mm
Weight: 560kg
Air tank: 500L
Filter fineness,use 4 stage filters,particle content≤0.01μm oil content≤0.003PPM
Equipment configuration:screw air compressor, air tank ,air dryer,four stage filters,auto drain valve

All in 1 solution

DEHAHA ALL IN ONE series compressed air system integrates screw air compressor, refrigerated air dryer, and air receiver tank into 1 assembly. This compact assembly provides a complete solution to produce clean and dry compressed air. Simplicity in just connecting an outlet pipe, drain pipe, and electrical cables to the system saves cost and space.

Product Parameters

Technical Parameters

Model	Air Delivery (m3/min)	Rated exhaust pressure (Mpa)	Power (kW)	Noise (Db)	Outlet diameter (In)	Dimension (mm)	Weight (Kg)	Exhaust pressure dew point (ºC)	Exhaust dust content (μm)	Exhaust oil content (ppm)	Gas storage tank capacity (L)
DBZY-10A	0.55	1.58	7.5	65	G3/4	14187001500	395	2~10	0.01	0.01	260
DBZY-15A	1.05	1.58	11	65	G3/4	18827901731	560	2~10	0.01	0.01	500
DBZY-20A	1.51	1.58	15	65	G3/4	18827901731	572	2~10	0.01	0.01	500
DMZY-15A	1.05	1.58	11	65	G3/4	18827901731	560	2~10	0.01	0.01	500
DMZY-20A	1.52	1.58	15	65	G3/4	18827901731	572	2~10	0.01	0.01	500
DMZY-30A	2.41	1.58	22	68	G3/4	188210811801	630	2~10	0.01	0.01	500
DCZY-30A	2.21	1.58	22	68	G3/4	188210811801	630	2~10	0.01	0.01	500

Notes:1. A represents air-cooling type,W represents water-cooling type;
2. Working Environment temperature: -5ºC~45ºC;
3. Discharge temperature is less than ambient temperature +10ºC~15ºC;
4. Drive Mode: belt driven;
5. Startup Mode: direct start under 11kw, and above 11kw;
6. Work Power: 380V / 50HZ, 460V / 230V / 6KV and 10KV voltages can be made for customers;
7. F.A.D volume flow test is according to ASMC PTC9 or ISO1217 standard (GB/T3853)

Our Advantages

Large displacement: Displacement 10% higher than ordinary piston compressor.

Energy-saving: Compared with piston air compressor, this series of models for the new national standard 2 energy efficiency products, excellent energy saving.
Easy to operate: 24 hours unattended all day work, free load automatically start, full load automatically shut down.
Strong stability:Under long time working, displacement and pressure stable, no crash phenomenon, low failure rate.

Application industry

Air compressors belong to the general equipment category and are widely used in steel, electric power, metallurgy, shipbuilding, textiles, electronics, chemicals, petroleum, mining, light industry, machinery manufacturing, paper printing, transportation facilities, food and medicine, casting and spraying, shipping terminals, Military technology, automotive technology, automotive industry, aerospace, infrastructure and other fields.

Company Profile

Dehaha Compressor was founded in 1996 with over 150 skilled employees and more than 25 R&D engineers’ teams.We focus on the research & develop, manufacture and energy-saving solutions of screw air compressor to create value for customers and society.

Dehaha opened to the world since 2015, and now we have a foreign trade department with more than dozens people, serving customers around the world 24 hours. We have sales representatives who can speak English, Spanish, Portuguese, French,and Russian which makes it easier for our clients from all over the world to interact and negotiate with us.now our valued customers are over 130 countries. Germany Standard and 13 years exporting experience help us won more than 50 loyal overseas agents.

Dehaha continuously innovates product development and management to meet customers’ demand. The powerful enterprise culture and continuous innovation make CHINAMFG improved rapidly to reach the business principle “Energy Saving First, Mutual Value Shared”. The production line of CHINAMFG is consist of screw air compressor from 5.5KW to 550KW, oil free air compressor, portable air compressor, permanent magnet variable frequency air compressor, high pressure air compressor and compressed air purification equipment, etc.

Dehaha mission is to be a world-renowned high-end brand, with sustainable development, constantly improving its own value and sharing it with our customers and staff. Committed to offer our customers a silent and energy-saving manufactured products.

Why choose us

1.Quality Guarantee

With more than 24 years industry experience and our compressor approved by CE, ISO9001, SGS, And TUV test.The raw materials are strictly inspected and Some key parts are imported from overseas.Each compressor must pass at least 5 hours of continuous testing before leaving the factory.

2.Warranty Period
The complete machines are proviede with one-year warranty, and the compressor air end with Two-year warranty and lifetime maintenance(With the exception of wearing parts)

3. Installation and Commissioning
Provied customers with installation and commissioning instructions,and all service-providing personnel are strictly trained technically by our company.

4.After -sales Services
Our company has service network in world, giving prompt replies to customers after notified within 24~48hours for troubleshooting.

5.Spare Parts
Our company always supply spare parts on most favorable terms.

FAQ

Q1. Are you trading company or manufacture ?

A: We are professional manufacture of screw air compressor of HangZhou(Close to ZheJiang ), China, more than 24 years.

Q2. How long is the delivery time ?
A: For standard voltage ,15 working days. Non-standard ,please contact our sales.

Q3. What’s payment term ?
A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc. Also we could accept USD, RMB, Euro and other currency.

Q4. How about your after-sales service ?
A: 1.Provide customers with installation and commissioning online instructions.
2. Well-trained engineers available to overseas service.
3.CHINAMFG agents and after service avaiable.arrange our engineers to help you training and installation.

Q5. How about your warranty?
A: One year for the whole machine and 2 years for screw air end, except consumable spare parts.

Q6. Do you have any certificate ?
A: Yes, per different customer’s market need ,we can offer CE ,ISO etc certificate.

Q7. What about the maintenance ?
A: First maintenance need to be done after 500Hours, and then every 2000-3000 hours to do the normal maintenance, and consider the actual environment.

After-sales Service:	Online Support
Warranty:	24months
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical

Samples:	US$ 1/Set 1 Set(Min.Order) \| Request Sample

Customization:	Available \|

air compressor

How are air compressors used in the food and beverage industry?

Air compressors play a vital role in the food and beverage industry, providing a reliable source of compressed air for various applications. Here are some common uses of air compressors in this industry:

1. Packaging and Filling:

Air compressors are extensively used in packaging and filling operations in the food and beverage industry. Compressed air is utilized to power pneumatic systems that control the movement and operation of packaging machinery, such as filling machines, capping machines, labeling equipment, and sealing devices. The precise and controlled delivery of compressed air ensures accurate and efficient packaging of products.

2. Cleaning and Sanitization:

Air compressors are employed for cleaning and sanitization purposes in food and beverage processing facilities. Compressed air is used to operate air-powered cleaning equipment, such as air blowguns, air-operated vacuum systems, and air knives. It helps remove debris, dust, and contaminants from production lines, equipment, and hard-to-reach areas. Additionally, compressed air is used for drying surfaces after cleaning and for applying sanitizing agents.

3. Cooling and Refrigeration:

In the food and beverage industry, air compressors are utilized in cooling and refrigeration systems. Compressed air is used to drive air compressors in refrigeration units, enabling the circulation of refrigerants and maintaining optimal temperatures for food storage and preservation. The controlled airflow provided by the compressors facilitates efficient cooling and refrigeration processes.

4. Aeration and Mixing:

Air compressors are used for aeration and mixing applications in the food and beverage industry. Compressed air is introduced into processes such as fermentation, dough mixing, and wastewater treatment. It helps in promoting oxygen transfer, enhancing microbial activity, and facilitating proper mixing of ingredients or substances, contributing to the desired quality and consistency of food and beverage products.

5. Pneumatic Conveying:

In food processing plants, air compressors are employed for pneumatic conveying systems. Compressed air is used to transport bulk materials such as grains, powders, and ingredients through pipes or tubes. It enables the gentle and efficient movement of materials without the need for mechanical conveyors, reducing the risk of product damage or contamination.

6. Quality Control and Testing:

Air compressors are utilized in quality control and testing processes within the food and beverage industry. Compressed air is used for leak testing of packaging materials, containers, and seals to ensure product integrity. It is also employed for spraying air or gases during sensory analysis and flavor testing.

7. Air Agitation:

In certain food and beverage production processes, air compressors are used for air agitation. Compressed air is introduced into tanks, mixing vessels, or fermentation tanks to create turbulence and promote mixing or chemical reactions. It aids in achieving consistent product quality and uniform distribution of ingredients or additives.

It is important to note that air compressors used in the food and beverage industry must meet strict hygiene and safety standards. They may require specific filtration systems, oil-free operation, and compliance with food safety regulations to prevent contamination or product spoilage.

By utilizing air compressors effectively, the food and beverage industry can benefit from improved productivity, enhanced product quality, and efficient processing operations.

air compressor

How do you choose the right air compressor for woodworking?

Choosing the right air compressor for woodworking is essential to ensure efficient and effective operation of pneumatic tools and equipment. Here are some factors to consider when selecting an air compressor for woodworking:

1. Required Air Volume (CFM):

Determine the required air volume or cubic feet per minute (CFM) for your woodworking tools and equipment. Different tools have varying CFM requirements, so it is crucial to choose an air compressor that can deliver the required CFM to power your tools effectively. Make sure to consider the highest CFM requirement among the tools you’ll be using simultaneously.

2. Tank Size:

Consider the tank size of the air compressor. A larger tank allows for more stored air, which can be beneficial when using tools that require short bursts of high air volume. It helps maintain a consistent air supply and reduces the frequency of the compressor cycling on and off. However, if you have tools with continuous high CFM demands, a larger tank may not be as critical.

3. Maximum Pressure (PSI):

Check the maximum pressure (PSI) rating of the air compressor. Woodworking tools typically operate within a specific PSI range, so ensure that the compressor can provide the required pressure. It is advisable to choose an air compressor with a higher maximum PSI rating to accommodate any future tool upgrades or changes in your woodworking needs.

4. Noise Level:

Consider the noise level of the air compressor, especially if you’ll be using it in a residential or shared workspace. Some air compressors have noise-reducing features or are designed to operate quietly, making them more suitable for woodworking environments where noise control is important.

5. Portability:

Assess the portability requirements of your woodworking projects. If you need to move the air compressor frequently or work in different locations, a portable and lightweight compressor may be preferable. However, if the compressor will remain stationary in a workshop, a larger, stationary model might be more suitable.

6. Power Source:

Determine the power source available in your woodworking workspace. Air compressors can be powered by electricity or gasoline engines. If electricity is readily available, an electric compressor may be more convenient and cost-effective. Gasoline-powered compressors offer greater flexibility for remote or outdoor woodworking projects where electricity may not be accessible.

7. Quality and Reliability:

Choose an air compressor from a reputable manufacturer known for producing reliable and high-quality equipment. Read customer reviews and consider the warranty and after-sales support offered by the manufacturer to ensure long-term satisfaction and reliability.

8. Budget:

Consider your budget and balance it with the features and specifications required for your woodworking needs. While it’s important to invest in a reliable and suitable air compressor, there are options available at various price points to accommodate different budgets.

By considering these factors and evaluating your specific woodworking requirements, you can choose an air compressor that meets the demands of your tools, provides efficient performance, and enhances your woodworking experience.

air compressor

Can air compressors be used for automotive applications?

Yes, air compressors can be used for various automotive applications and are commonly found in automotive repair shops, garages, and even in some vehicles. Here are some automotive applications where air compressors are frequently utilized:

1. Tire Inflation: Air compressors are commonly used to inflate tires in automotive applications. They provide a convenient and efficient way to inflate tires to the recommended pressure, ensuring optimal tire performance, fuel efficiency, and safety.

2. Air Tools: Air compressors power a wide range of pneumatic tools used in automotive repair and maintenance. These tools include impact wrenches, ratchet wrenches, air hammers, pneumatic drills, and sanders. Air-powered tools are favored for their high torque and power-to-weight ratio, making them suitable for heavy-duty automotive tasks.

3. Spray Painting: Air compressors are commonly used in automotive painting applications. They power airbrushes and spray guns that are used to apply paint, primer, and clear coats. Air compressors provide the necessary air pressure to atomize the paint and deliver a smooth and even finish.

4. Brake System Maintenance: Air compressors play a crucial role in maintaining and diagnosing automotive brake systems. They are used to pressurize the brake lines, allowing for proper bleeding of the system and detection of leaks or faults.

5. Suspension Systems: Some automotive suspension systems, such as air suspensions, rely on air compressors to maintain the desired air pressure in the suspension components. The compressor inflates or deflates the suspension as needed to provide a comfortable ride and optimal handling.

6. Cleaning and Dusting: Air compressors are used for cleaning automotive parts, blowing away dust and debris, and drying surfaces. They provide a high-pressure stream of air that effectively cleans hard-to-reach areas.

7. Air Conditioning Systems: Air compressors are a key component in automotive air conditioning systems. They compress and circulate refrigerant, allowing the system to cool and dehumidify the air inside the vehicle.

When using air compressors for automotive applications, it’s important to consider the specific requirements of the task at hand. Ensure that the air compressor has the necessary pressure and capacity to meet the demands of the application. Additionally, use appropriate air hoses, fittings, and tools that are compatible with the compressor’s output.

Overall, air compressors are versatile and valuable tools in the automotive industry, providing efficient power sources for a wide range of applications, from tire inflation to powering pneumatic tools and supporting various automotive systems.

China wholesaler 11kw High Quality 16bar Combined Laser Cutting Screw Air Compressor with Air Tank and Air Dryer for Sandblasting air compressor for sale
editor by CX 2023-10-30

China factory CHINAMFG High Pressure 10 Bar 6m3 Diesel Compressor with Wheels Mounted Screw Air Compressor for Mining wholesaler

Product Description

Product introduction
Power: 81kw
Speed: 2200r/min
Volumetric flow:   6m3/min(210cfm)
Exhaust pressure: 10bar(145psi)
Number of batteries: 2
Brand name: C ummins
Color:  Blue, Can be customized
Specification: 3000*2000*1900mm
Weight:   1800kg

Detailed Photos

High reliability
The compressor has few parts and no wearing parts, so it operates reliably, has a long service life, and the interval between overhauls can reach 40,000 to 80,000 hours.
Strong adaptability
With the feature of forced air delivery, the volumetric flow rate is hardly affected by the exhaust pressure, and can maintain high efficiency in a wide speed range.

Large capacity battery
High impact strength and surface hardnesshigh temperature resistance, corrosion resistance and good stability.

Oil gas Separator
High quality and large volume Oil gas separator,lt can ensure stable oil transmission and is not easy to block.

Efficient cooling system
The operation status is clear at a glance, andthe intelligent cooling system is clearly visible.

With wheels
It can be moved more conveniently, and it is effortless to push and pull by 1 person, saving time and effort.

Product Parameters

Diesel Mobile Compressor Parameters Table
Model		OPM-37-8(F)	OPM-37-8	OPM-55-8(F)	OPM-55-10(F)
Model style		Fixed type(No wheel)	Two wheels	Fixed type(No wheel)	Fixed type(No wheel)
Screw air compressor	Compression level	Single stage	Single stage	Single stage	Single stage
	Exhaust pressure	8bar (116psi)	8bar (116psi)	8bar (116psi)	10bar (145psi)
	Volumetric flow	4.5m3/min (157cfm)	4.5m3/min (157cfm)	6m3/min (210cfm)	5m3/min (175cfm)
	Maximum towing speed (km/h)	20	20	20	20
	Main engine lubricating oil (L)	20	20	20	20
	Air supply valve size / quantity	G1″*2	G1″*2	G1″ *2	G1″ *2
	Maximum recommended working altitude	2000	2000	2000	2000
Diesel engines	Rated power (kw) / speed (r / min).	37/1600	37/1600	55/2000	55/2000
	Brand name	XICHAI	XICHAI	XICHAI	XICHAI
	Number of cylinders	4	4	4	4
	Air inlet method	Inhale naturally	Inhale naturally	Turbocharging & inter-air cooling	Turbocharging & inter-air cooling
	Displacement (L)	2.54	2.54	2.54	2.54
	Engine lubricating oil quantity (L)	7	7	7	7
	Fuel tank capacity (L)	100	100	100	100
	Number of batteries	1	1	2	2
Machine parameters	Length (mm)	1800	2600	1800	1800
	Width (mm)	1150	1700	1150	1150
	Height (mm)	1000	1400	1400	1400
	Weight (kg)	800	950	900	900
	Wheel size * quantity	/	175/65R14C*2	/	/
	Noise level (sound level) db	80 ± 3	80 ± 3	90 ± 3	90 ± 3
	Exhaust emission standards	Non-road country three	Non-road country three	Non-road country three	Non-road country three

Model		OPM-118-8	OPM-118-10	OPM-118-13	OPM-140-14.5(2)
Model style		Four wheels	Four wheels	Four wheels	Two wheels
Screw air compressor	Compression level	Single stage	Single stage	Single stage	Single stage
	Exhaust pressure	8bar (116psi)	10bar (145psi)	13bar (189psi)	14.5bar (210psi)
	Volumetric flow	13m3/min (455cfm)	11m3/min (385cfm)	10m3/min (350cfm)	15m3/min (525cfm)
	Maximum towing speed (km/h)	20	20	20	20
	Main engine lubricating oil (L)	60	60	60	90
	Air supply valve size / quantity	G1 1/2″ 1 G1″ 1	G1 1/2″ 1 G1″ 1	G1 1/2″ 1 G1″ 1	G1 1/2″ 1 G1″ 1
	Maximum recommended working altitude	2000	2000	2000	2000
Diesel engines	Rated power (kw) / speed (r / min).	118/2300	118/2300	118/2300	140/2200
	Brand name	YUCHAI	YUCHAI	YUCHAI	YUCHAI
	Number of cylinders	4	4	4	6
	Air inlet method	Turbocharging & inter-air cooling	Turbocharging & inter-air cooling	Turbocharging & inter-air cooling	Turbocharging & inter-air cooling
	Displacement (L)	4.75	4.75	4.75	6.5
	Engine lubricating oil quantity (L)	13	13	13	15
	Fuel tank capacity (L)	200	200	200	250
	Number of batteries	2	2	2	1
Machine parameters	Length (mm)	3200	3200	3200	3830
	Width (mm)	1600	1600	1600	2100
	Height (mm)	2050	2050	2050	2250
	Weight (kg)	2000	2000	2000	2500
	Wheel size * quantity	//	//	//	7.5-16-14RP*2
	Noise level (sound level) db	82 ± 3	82 ± 3	82 ± 3	82 ± 3
	Exhaust emission standards	Non-road country three	Non-road country three	Non-road country three	Non-road country three

Model		OPM-140-14.5(4)	OPM-162-15(Single)	OPM-162-16(Single)	OPM-162-8(Two-stage)
Model style		Four wheels	Four wheels	Four wheels	Four wheels
Screw air compressor	Compression level	Single stage	Single stage	Single stage	Two-stage
	Exhaust pressure	14.5bar (210psi)	15bar (218psi)	16bar (232psi)	8bar (116psi)
	Volumetric flow	15m3/min (525cfm)	16m3/min (560cfm)	15m3/min (525cfm)	18m3/min (630cfm)
	Maximum towing speed (km/h)	20	20	20	20
	Main engine lubricating oil (L)	90	90	90	90
	Air supply valve size / quantity	G1 1/2″ 1 G1″ 1	G1 1/2″ 1 G1″ 1	G1 1/2″ 1 G1″ 1	G1 1/2″ 1 G1″ 1
	Maximum recommended working altitude	2000	2000	2000	2000
Diesel engines	Rated power (kw) / speed (r / min).	140/2200	162/2200	162/2200	162/2200
	Brand name	YUCHAI	YUCHAI	YUCHAI	YUCHAI
	Number of cylinders	6	6	6	6
	Air inlet method	Turbocharging & inter-air cooling	Turbocharging & inter-air cooling	Turbocharging & inter-air cooling	Turbocharging & inter-air cooling
	Displacement (L)	6.5	6.5	6.5	6.5
	Engine lubricating oil quantity (L)	15	15	15	15
	Fuel tank capacity (L)	250	250	250	250
	Number of batteries	1	2	2	2
Machine parameters	Length (mm)	3500	3360	3360	3360
	Width (mm)	1750	1690	1690	1690
	Height (mm)	2200	2200	2200	2200
	Weight (kg)	3100	3500	3500	3500
	Wheel size * quantity	7.5-16-14RP*4	215/75R16*4	215/75R16*4	215/75R16*4
	Noise level (sound level) db	82 ± 3	82 ± 3	82 ± 3	82 ± 3
	Exhaust emission standards	Non-road country three	Non-road country three	Non-road country three	Non-road country three

Model		OPM-162-13(Two-stage)	OPM-162-16(Two-stage)	OPM-162-20(Two-stage)	OPM-191-17
Model style		Four wheels	Four wheels	Four wheels	Four wheels
Screw air compressor	Compression level	Two-stage	Two-stage	Two-stage	Two-stage
	Exhaust pressure	13bar (189psi)	16-17bar (232-247psi)	20bar (290psi)	17bar (247psi)
	Volumetric flow	17m3/min (595cfm)	17m3/min (595cfm)	12m3/min (420cfm)	18m3/min (630cfm)
	Maximum towing speed (km/h)	20	20	20	20
	Main engine lubricating oil (L)	90	90	90	100
	Air supply valve size / quantity	G1 1/2″ 1 G1″ 1	G1 1/2″ 1 G1″ 1	G1 1/2″ 1 G1″ 1	G1 1/2″ 1 G1″ 1
	Maximum recommended working altitude	2000	2000	2000	2000
Diesel engines	Rated power (kw) / speed (r / min).	162/2200	162/2200	162/2200	191/2200
	Brand name	YUCHAI	YUCHAI	YUCHAI	YUCHAI
	Number of cylinders	6	6	6	6
	Air inlet method	Turbocharging & inter-air cooling	Turbocharging & inter-air cooling	Turbocharging & inter-air cooling	Turbocharging & inter-air cooling
	Displacement (L)	6.5	6.5	6.5	7.3
	Engine lubricating oil quantity (L)	15	15	15	22
	Fuel tank capacity (L)	250	250	250	320
	Number of batteries	2	2	2	2
Machine parameters	Length (mm)	3360	3360	3360	3360
	Width (mm)	1690	1690	1690	1690
	Height (mm)	2200	2200	2200	2200
	Weight (kg)	3500	3500	3500	3800
	Wheel size * quantity	215/75R16*4	215/75R16*4	215/75R16*4	7.5-16-14RP*4
	Noise level (sound level) db	82 ± 3	82 ± 3	82 ± 3	82 ± 3
	Exhaust emission standards	Non-road country three	Non-road country three	Non-road country three	Non-road country three

Packaging & Shipping

Our company cleans the inside and outside of the product before delivery, and then covers it with multi-layer industrial stretch film, bubble film, anti-collision column, and finally loads it with wooden pallets or wooden boxes.

Company Profile

ZheJiang CHINAMFG Machinery Manufacturing Co.,Ld base in HangZhou ZheJiang , anAAA-level enterprise with high-quality service and integrity in China.
OPPAIR as 1 of the world’s largest air compressor system suppliers, currently developing the following products: Fixed-speed Air Compressors, Permanent Magnet VariableFrequency Air Compressors, Permanent Magnet Variable Frequency Two-stage Air Compressors, 4-IN-1 Air Compressors (lntegrated Air Compressor for Laser Cutting Machine)Supercharger, CHINAMFG Air Dryer, Adsorption Dryer, Air Storage Tank and related accessories.

Certifications

OPPAIR’s quality meets EU standards and has CE quality inspection certificate.

The testing agency is a recognized certification agency in Italy. After certification at our factory site, strict machine testing and CE certificate are issued. Authority, more trustworthy.

The following picture is the certification certificate issued by SGS company after the on-site certification of our company. Field Certification CHINAMFG is a trusted manufacturer.

FAQ

Q1: Why do customers choose us?
A: ZheJiang CHINAMFG Machinery Manufacturing Co., Ltd. has a history of 16 years. We specialize in the production of screw air compressors. We warmly welcome your small trial orders for quality or market testing, and we offer special services.

Q2: Are you a manufacturer or a trading company?
A: We are a professional manufacturer with a large modern factory in HangZhou, China. OEM and ODM services can be accepted.

Q3: What is your delivery time?
A: 380V 50HZ We can ship within 10 days. It takes 20 days for other voltages, if you need to rush, please contact our sales staff in advance.

Q4: How long is the warranty period of your air compressor?
A: One year for the whole machine and 2 years for the screw host, excluding consumables.

Q5: How long can your air compressor last?
A: More than 10 years under normal use.

Q6: What are the payment terms?
A: T/T, L/C, Western Union, Credit Card, etc. We can also accept USD, RMB, EUR and other currencies.

Q7: Will you provide some spare parts for the machine?
A: Yes, of course.

Q8: Can you accept OEM orders?
A: Yes, with a professional design team, OEM orders are very welcome.

Q9: What kind of trade terms can you accept?
A: Available trade terms: FOB, CIF, EXW, etc.

Q10: How about the product packaging?
A: We strictly pack our products in standard airworthy boxes.

After-sales Service:	1year
Warranty:	1year
Lubrication Style:	Oil-less
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Angular

Samples:	US$ 11953/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \|

air compressor

How are air compressors used in the food and beverage industry?

1. Packaging and Filling:

2. Cleaning and Sanitization:

3. Cooling and Refrigeration:

4. Aeration and Mixing:

5. Pneumatic Conveying:

6. Quality Control and Testing:

7. Air Agitation:

By utilizing air compressors effectively, the food and beverage industry can benefit from improved productivity, enhanced product quality, and efficient processing operations.

air compressor

What are the environmental considerations when using air compressors?

When using air compressors, there are several environmental considerations to keep in mind. Here’s an in-depth look at some of the key factors:

Energy Efficiency:

Energy efficiency is a crucial environmental consideration when using air compressors. Compressing air requires a significant amount of energy, and inefficient compressors can consume excessive power, leading to higher energy consumption and increased greenhouse gas emissions. It is important to choose energy-efficient air compressors that incorporate features such as Variable Speed Drive (VSD) technology and efficient motor design, as they can help minimize energy waste and reduce the carbon footprint.

Air Leakage:

Air leakage is a common issue in compressed air systems and can contribute to energy waste and environmental impact. Leaks in the system result in the continuous release of compressed air, requiring the compressor to work harder and consume more energy to maintain the desired pressure. Regular inspection and maintenance of the compressed air system to detect and repair leaks can help reduce air loss and improve overall energy efficiency.

Noise Pollution:

Air compressors can generate significant noise levels during operation, which can contribute to noise pollution. Prolonged exposure to high noise levels can have detrimental effects on human health and well-being and can also impact the surrounding environment and wildlife. It is important to consider noise reduction measures such as sound insulation, proper equipment placement, and using quieter compressor models to mitigate the impact of noise pollution.

Emissions:

While air compressors do not directly emit pollutants, the electricity or fuel used to power them can have an environmental impact. If the electricity is generated from fossil fuels, the associated emissions from power plants contribute to air pollution and greenhouse gas emissions. Choosing energy sources with lower emissions, such as renewable energy, can help reduce the environmental impact of operating air compressors.

Proper Waste Management:

Proper waste management is essential when using air compressors. This includes the appropriate disposal of compressor lubricants, filters, and other maintenance-related materials. It is important to follow local regulations and guidelines for waste disposal to prevent contamination of soil, water, or air and minimize the environmental impact.

Sustainable Practices:

Adopting sustainable practices can further reduce the environmental impact of using air compressors. This can include implementing preventive maintenance programs to optimize performance, reducing idle time, and promoting responsible use of compressed air by avoiding overpressurization and optimizing system design.

By considering these environmental factors and taking appropriate measures, it is possible to minimize the environmental impact associated with the use of air compressors. Choosing energy-efficient models, addressing air leaks, managing waste properly, and adopting sustainable practices can contribute to a more environmentally friendly operation.

air compressor

How do you choose the right size of air compressor for your needs?

Choosing the right size of air compressor is essential to ensure optimal performance and efficiency for your specific needs. Here are some factors to consider when selecting the appropriate size:

1. Air Demand: Determine the air demand requirements of your applications. Calculate the total CFM (Cubic Feet per Minute) needed by considering the air consumption of all the pneumatic tools and equipment that will be operated simultaneously. Choose an air compressor with a CFM rating that meets or exceeds this total demand.

2. Pressure Requirements: Consider the required operating pressure for your applications. Check the PSI (Pounds per Square Inch) rating of the tools and equipment you will be using. Ensure that the air compressor you choose can deliver the necessary pressure consistently.

3. Duty Cycle: Evaluate the duty cycle of the air compressor. The duty cycle represents the percentage of time the compressor can operate within a given time period without overheating or experiencing performance issues. If you require continuous or heavy-duty operation, choose a compressor with a higher duty cycle.

4. Power Source: Determine the available power source at your location. Air compressors can be powered by electricity or gasoline engines. Ensure that the chosen compressor matches the available power supply and consider factors such as voltage, phase, and fuel requirements.

5. Portability: Assess the portability requirements of your applications. If you need to move the air compressor frequently or use it in different locations, consider a portable or wheeled compressor that is easy to transport.

6. Space and Noise Constraints: Consider the available space for installation and the noise restrictions in your working environment. Choose an air compressor that fits within the allocated space and meets any noise regulations or requirements.

7. Future Expansion: Anticipate any potential future expansions or increases in air demand. If you expect your air demand to grow over time, it may be wise to choose a slightly larger compressor to accommodate future needs and avoid the need for premature replacement.

8. Budget: Consider your budgetary constraints. Compare the prices of different air compressor models while ensuring that the chosen compressor meets your specific requirements. Keep in mind that investing in a higher-quality compressor may result in better performance, durability, and long-term cost savings.

By considering these factors and evaluating your specific needs, you can choose the right size of air compressor that will meet your air demand, pressure requirements, and operational preferences, ultimately ensuring efficient and reliable performance.

China factory CHINAMFG High Pressure 10 Bar 6m3 Diesel Compressor with Wheels Mounted Screw Air Compressor for Mining wholesaler
editor by CX 2023-10-30

China OEM Energy Saving Permanent Magnetic Motor Screw Air Compressor air compressor for sale

Product Description

Energy saving Permanent magnetic motor screw air compressor

Advantages of the twin screw main machine:
1. Adopt the most advanced technical speed regulating electric motor-permanent magnetic motor, efficiency can be up to 97%, higher by 3%-4% than common frequency conversion device and motors type, saving energy obviously.
2. Permanent magnetic motor and the screw compression main devise adopt embedded integrated direct-connecting structure, without coupling part or transmission gear, ensure 100% transmission efficiency.
3. Permanent magnetic electric motor is without motor bearing or sleeve, so no need lubricating grease, no concern alignment problem, compact structure, convenient use and maintenance.
4. The whole machine work in frequency conversion state, and can operate frequency modulation according to the client’s actual requirement of air consumption, realizing high efficiency and energy saving.
5. Machine starting on frequency conversion state, greatly reducing the impact to the power grid equipment, avoiding of damage to the electric equipment, and saving electric energy when starting.
6. No need to set working pressure up and bottom limit value, can operate by regulating the frequency at the setting pressure point to stabilize the pressure, so can save electric energy by 10%-15%.
7. Compared with the fixed speed compressor, our compressor can save energy by 30%; compared with the common frequency compressor, our compressor can save energy by 5%-10%.

Advantages of the whole air compressor unit:
1. Approved by ISO9001certificate, SGS, CE and etc..
2. Adopt world famous brand of twin-screw main machine, high efficiency, reliable and long use life.
3. Adopt world famous brand of air intake filter, oil filter, air and oil separator, realize high filtration accuracy, compressed air oil content under 3ppm, reach to international advanced standard level.
4. Equip with the most advanced air control system. Adopt air intake valve, intelligent control system and pressure sensor combined control method, can operate by ON and OFF 2 point, stepless air capacity control system, time-delay stop and automatically start device 3 air capacity control method, can meet different clients demand.
5. Intelligent microcomputer control system, Chinese and English language operation interface, malfunction display, alarm and machine stop automatically.
6. Adopt high quality and world famous brand of main components, like UK APD oil filter, America AMOT temperature controlling valve, SCHNEIDER electric parts and etc., high efficiency, reliable and long use life.

Technical parameter of CHINAMFG air compressor:

Model	Exhause pressure (Mpa)	Air displacemen (m3/min)	Power (Kw)	Noise (dBa)	Dimensions (mm)	Outlet pipe size	Weight (Kg)
TKLYC-7F	0.7/0.8/1.0	1.23/1.16/1.02	7.5	65±3	840670925	G3/4	350
TKLYC-11F	0.7/0.8/1.0	1.65/1.62/1.4	7.5	65±3	10008201145	G3/4	390
TKLYC-15F	0.7/0.8/1.0	2.65/2.24/2.1	15	65±3	13008501257	G1	410
TKLYC-18F	0.7/0.8/1.0	3.1/3.0/2.7	18.5	65±3	13008501257	G1	440
TKLYC-22F	0.7/0.8/1.0	3.8/3.7/3.3	22	65±3	13008501258	G1	650
TKLYC-30F	0.7/0.8/1.0	5.3/5.1/4.5	30	68±3	160011001430	G1 1/2	800
TKLYC-37F	0.7/0.8/1.0	6.7/6.5/5.7	37	68±3	160011001430	G1 1/2	850
TKLYC-45F	0.7/0.8/1.0	8.6/8.0/7.1	45	68±3	160011001430	G1 1/2	900
TKLYC-55F	0.7/0.8/1.0	10.3/10.1/9.3	55	72±3	175011501500	DN50	1650
TKLYC-75F	0.7/0.8/1.0	14.0/13.5/12.5	75	72±3	175011501500	DN50	1800
TKLYC-90F	0.7/0.8/1.0	17.2/15.9/14.0	90	72±3	200011501680	DN50	1950
TKLYC-110F	0.7/0.8/1.0	21.4/19.9/18.1	110	73±3	230015401900	DN80	2500
TKLYC-132F	0.7/0.8/1.0	24.6/23.8/22.1	132	73±3	230015401900	DN80	2600
TKLYC-160F	0.7/0.8/1.0	28.7/27.1/25.2	160	75±3	290015402120	DN80	3600
TKLYC-185F	0.7/0.8/1.0	33.5/30.5/27.0	185	76±3	310019402389	DN80	4200
TKLYC-200F	0.7/0.8/1.0	36.5/33.5/30.6	200	78±3	310019402389	DN100	4400
TKLYC-250F	0.7/0.8/1.0	45.3/43.0/38.1	250	78±3	340020502330	DN100	4900

Our factory and workshop

After sales service:
1. Providing professional air compression program designing for free.
2. Providing our factory original machine parts at lowest price after machine sales.
3. Providing training and guidance for free, customers can send their staff to our factory to learn how to operate the machines.
4. Warranty period: the screw main machine is 1 year, the bearing is 1 year, the wear parts of air intake valve, electric components, electromagnetic valve, rate valve are 6 months
5. The air filter, oil filter, oil-water separator, lubricating oil, rubber parts and etc. are not included in warranty range.

Certification and patents of our air compressor

FAQ:
Q1: Are you factory or trade company?
A1: We are factory.
Q2: Warranty terms of your machine?
A2: One year warranty for the machine and technical support according to your needs.
Q3: Will you provide some spare parts of the machines?
A3: Yes, of course.
Q4: How long will you take to arrange production?
A4: 380V 50HZ we can delivery the goods within 20 days. Other electricity or other color we will delivery within 30 days.
Q5: Can you accept OEM orders?
A5: Yes, with professional design team, OEM orders are highly welcome!

Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Cylinder Position:	Vertical
Structure Type:	Closed Type
Installation Type:	Stationary Type
Type:	Twin-Screw Compressor

Customization:	Available \|

air compressor

Can air compressors be used for painting and sandblasting?

Yes, air compressors can be used for both painting and sandblasting applications. Here’s a closer look at how air compressors are utilized for painting and sandblasting:

Painting:

Air compressors are commonly used in painting processes, especially in automotive, industrial, and construction applications. Here’s how they are involved:

Spray Guns: Air compressors power spray guns used for applying paint coatings. The compressed air atomizes the paint, creating a fine mist that can be evenly sprayed onto surfaces. The pressure and volume of the compressed air impact the spray pattern, coverage, and overall finish quality.
Paint Mixers and Agitators: Compressed air is often used to power mixers and agitators that ensure proper blending of paint components. These devices use the compressed air to stir or circulate the paint, preventing settling and maintaining a consistent mixture.
Airbrushing: Air compressors are essential for airbrushing techniques, which require precise control over airflow and pressure. Airbrushes are commonly used in artistic applications, such as illustrations, murals, and fine detailing work.

Sandblasting:

Air compressors play a crucial role in sandblasting operations, which involve propelling abrasive materials at high velocity to clean, etch, or prepare surfaces. Here’s how air compressors are used in sandblasting:

Blasting Cabinets: Air compressors power blasting cabinets or booths, which are enclosed spaces where the sandblasting process takes place. The compressed air propels the abrasive media, such as sand or grit, through a nozzle or gun, creating a forceful stream that impacts the surface being treated.
Abrasive Blasting Pots: Air compressors supply air to abrasive blasting pots or tanks that store and pressurize the abrasive media. The compressed air from the compressor enters the pot, pressurizing it and allowing for a controlled release of the abrasive material during the sandblasting process.
Air Dryers and Filters: In sandblasting applications, it is crucial to have clean, dry air to prevent moisture and contaminants from affecting the abrasive blasting process and the quality of the surface being treated. Air compressors may be equipped with air dryers and filters to remove moisture, oil, and impurities from the compressed air.

When using air compressors for painting or sandblasting, it is important to consider factors such as the compressor’s pressure and volume output, the specific requirements of the application, and the type of tools or equipment being used. Consult the manufacturer’s guidelines and recommendations to ensure the air compressor is suitable for the intended painting or sandblasting tasks.

Proper safety measures, such as wearing protective gear and following established protocols, should always be followed when working with air compressors for painting and sandblasting applications.

air compressor

Can air compressors be used for medical and dental applications?

Yes, air compressors can be used for various medical and dental applications. Compressed air is a reliable and versatile utility in healthcare settings, providing power for numerous devices and procedures. Here are some common applications of air compressors in medical and dental fields:

1. Dental Tools:

Air compressors power a wide range of dental tools and equipment, such as dental handpieces, air syringes, air scalers, and air abrasion devices. These tools rely on compressed air to generate the necessary force and airflow for effective dental procedures.

2. Medical Devices:

Compressed air is used in various medical devices and equipment. For example, ventilators and anesthesia machines utilize compressed air to deliver oxygen and other gases to patients. Nebulizers, used for respiratory treatments, also rely on compressed air to convert liquid medications into a fine mist for inhalation.

3. Laboratory Applications:

Air compressors are used in medical and dental laboratories for various purposes. They power laboratory instruments, such as air-driven centrifuges and sample preparation equipment. Compressed air is also used for pneumatic controls and automation systems in lab equipment.

4. Surgical Tools:

In surgical settings, compressed air is employed to power specialized surgical tools. High-speed air-driven surgical drills, saws, and bone-cutting instruments are commonly used in orthopedic and maxillofacial procedures. Compressed air ensures precise control and efficiency during surgical interventions.

5. Sterilization and Autoclaves:

Compressed air is essential for operating sterilization equipment and autoclaves. Autoclaves use steam generated by compressed air to sterilize medical instruments, equipment, and supplies. The pressurized steam provides effective disinfection and ensures compliance with rigorous hygiene standards.

6. Dental Air Compressors:

Specialized dental air compressors are designed specifically for dental applications. These compressors have features such as moisture separators, filters, and noise reduction mechanisms to meet the specific requirements of dental practices.

7. Air Quality Standards:

In medical and dental applications, maintaining air quality is crucial. Compressed air used in healthcare settings must meet specific purity standards. This often requires the use of air treatment systems, such as filters, dryers, and condensate management, to ensure the removal of contaminants and moisture.

8. Compliance and Regulations:

Medical and dental facilities must comply with applicable regulations and guidelines regarding the use of compressed air. These regulations may include requirements for air quality, maintenance and testing procedures, and documentation of system performance.

It is important to note that medical and dental applications have specific requirements and standards. Therefore, it is essential to choose air compressors and associated equipment that meet the necessary specifications and comply with industry regulations.

air compressor

What is the role of air compressor tanks?

Air compressor tanks, also known as receiver tanks or air receivers, play a crucial role in the operation of air compressor systems. They serve several important functions:

China OEM Energy Saving Permanent Magnetic Motor Screw Air Compressor air compressor for sale
editor by CX 2023-10-30

China Standard China High Performance 1.52m 3 /Min 18~20 Bar Integrated Combined 4-in 1 Screw Air Compressor with Air Dryer, Air Tank for Laser Cutting Machine air compressor price

Product Description

China High Performance 1.52m 3 /min 18~20 bar Integrated Combined 4-in 1 Screw Air Compressor with Air Dryer, Air Tank for Laser Cutting Machine

Model	RMZY-20AS
Free air delivery	1.52 m3/min
Working pressure	18~20bar(adjustable)
Inverter brand	Inovance
Brand of screw air end	Original CHINAMFG AA
Control	PLC controller
Driven	Direct driven
Cooling	By air
Electric motor	PM VSD motor 400v/3ph/50hz
Discharge temperature	+8 ºC than ambient
Noise	less than 65 dB(A)
Air outlet size	G3/4″
Air tank	400 liters, auto drain pneumatic valve
Filters	5-fold precision filters, make air oilless & dustless
Dimension	18008501770mm
Weight	400kg

Product features 1. 1. One-piece design, user-friendly, can be used with electricity.
2. Adopt original imported main engine to ensure high efficiency and stability, and smoother cutting.
3. Multiple protection devices, multiple shock and noise reduction configurations, low noise.
4. High-efficiency CHINAMFG dryer and 5-stage high-efficiency special-precision filter, high filtration accuracy, pressure dew point as low as 2~5°C, gas oil content as low as 0.001PPM, and particle filtration accuracy as high as 0.01um, ensuring the purity of compressed air.
5.Thermostatic control. The start and stop of the cooling fan can be set according to the season to better control the oil temperature and avoid emulsification.
6. 500L large air storage tank, full of air, stable air supply. Compressed air is deposited in the air storage tank, which is more conducive to water and sewage removal.
7. After-treatment centralized drainage, it helps to keep the customer’s site clean.

Technical Parameters

Model	Air Delivery (m3/min)	Rated exhaust pressure (Bar)	Power (kW)	Noise (Db)	Outlet diameter (In)	Dimension (mm)	Weight (Kg)	Exhaust pressure dew point (ºC)	Exhaust dust content (μm)	Exhaust oil content (ppm)	Gas storage tank capacity (L)



RMZY-15A	1.05	16	11/15	65	G3/4	18009001780	380	2~10	0.01	0.01	400

RMZY-20A	1.52	16	15/20	65	G3/4	18009001780	400	2~10	0.01	0.01	400

RMZY-30A	2.41	16	22/30	65	G3/4	180011001850	500	2~10	0.01	0.01	400

RMZY-30AA	2.41	16	22/30	65	G3/4	180011001850	620	2~10	0.01	0.01	400

RMZY-15AS	1.05	18-20	11/15	65	G3/4	18009001780	380	2~10	0.01	0.01	400

RMZY-20AS	1.52	18-20	15/20	68	G3/4	18008501770	400	2~10	0.01	0.01	400

RMZY-30AS	2.41	18-20	22/30	68	G3/4	18008701940	500	2~10	0.01	0.01	400

RMZY-30AAS	2.41	18-20	22/30	68	G3/4	22809002100	620	2~10	0.01	0.01	400

Application industry

Successful cases

Packaging & Shipping

Packaging & Shipping

1.Packing Details: Plywood crate pallet plus foam board and bubble film, Full closed wooden case. 1pcs/each package (for stationary screw air compressor)
2.Shipping method: by sea, by LCL/FCL or as requested
3.Delivery method: FOB, CFR, CIF and EXW etc.

Company Profile

ZheJiang CHINAMFG Machinery Co., Ltd. is a company dedicated to the production and research and development of various gas compression equipment. The company was established in 2012 and has a total of 5 licensed technical engineers. Mainly engaged in air, nitrogen, CO2 and other special gas compression equipment and after-treat equipment. With the development in recent years, the company has established a foreign trade team in ZheJiang , and hired foreign trade consultants with 10 years of industry experience to better serve customers worldwide. With excellent quality and the support of 30 distributors worldwide, our annual sales in 2018 exceeded 5 million US dollars. We look CHINAMFG to working with you to create a better tomorrow!

Payment and delivery

After Sales Service

1. 24/7 after sales service support in different languages.
2. Customized color, Model ect.
3. Guidance of installation and commissioning on site can be provided by factory-trained technicians or local Authorized Service Center.
4. Delivery on time and excellent after-sales service.
5. Plenty of original spare parts with proven quality.
6. All kinds of technical documents in different languages.

FAQ

Q1. Are you trading company or manufacture ?
A: We are professional manufacture of screw air compressor of HangZhou,ZheJiang ,China. More than 18 years of experience in air compressor manufacturing.

Q2. How long is the delivery time ?
A: For standard voltage ,15 working days. Non-standard ,please contact our sales.

Q3. What’s payment term ?
A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc. Also we could accept USD, RMB, Euro and other currency.

Q4. How about your after-sales service ?
A: 1.Provide customers with installation and commissioning online instructions.
2. Well-trained engineers available to overseas service.
3.CHINAMFG agents and after service avaiable.arrange our engineers to help you training and installation.

Q5. How about your warranty?
A: One year for the whole machine and 2 years for screw air end, except consumable spare parts.

Q6. Do you have any certificate ?
A: Yes, per different customer’s market need ,we can offer CE ,ISO etc certificate.

Q7. What about the maintenance ?
A: First maintenance need to be done after 500Hours, and then every 2000-3000 hours to do the normal maintenance, and consider the actual environment.

Q8. How do you control quality ?
A: 1. The raw materials are strictly inspected
2. Some key parts are imported from overseas
3. Each compressor must pass at least 5 hours of continuous testing before leaving the factory.

Q9. Do you offer OEM service ?
A: Yes.Both OEM & ODM service can be accepted.

Q10.How long could your air compressor be used?
A: Generally, more than 10 years.

After-sales Service:	Online Support
Warranty:	24month
Lubrication Style:	Lubricated

Samples:	US$ 5000/SET 1 SET(Min.Order) \| Order Sample

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

What are the energy-saving technologies available for air compressors?

There are several energy-saving technologies available for air compressors that help improve their efficiency and reduce energy consumption. These technologies aim to optimize the operation of air compressors and minimize energy losses. Here are some common energy-saving technologies used:

1. Variable Speed Drive (VSD) Compressors:

VSD compressors are designed to adjust the motor speed according to the compressed air demand. By varying the motor speed, these compressors can match the output to the actual air requirement, resulting in energy savings. VSD compressors are particularly effective in applications with varying air demands, as they can operate at lower speeds during periods of lower demand, reducing energy consumption.

2. Energy-Efficient Motors:

The use of energy-efficient motors in air compressors can contribute to energy savings. High-efficiency motors, such as those with premium efficiency ratings, are designed to minimize energy losses and operate more efficiently than standard motors. By using energy-efficient motors, air compressors can reduce energy consumption and achieve higher overall system efficiency.

3. Heat Recovery Systems:

Air compressors generate a significant amount of heat during operation. Heat recovery systems capture and utilize this wasted heat for other purposes, such as space heating, water heating, or preheating process air or water. By recovering and utilizing the heat, air compressors can provide additional energy savings and improve overall system efficiency.

4. Air Receiver Tanks:

Air receiver tanks are used to store compressed air and provide a buffer during periods of fluctuating demand. By using appropriately sized air receiver tanks, the compressed air system can operate more efficiently. The tanks help reduce the number of starts and stops of the air compressor, allowing it to run at full load for longer periods, which is more energy-efficient than frequent cycling.

5. System Control and Automation:

Implementing advanced control and automation systems can optimize the operation of air compressors. These systems monitor and adjust the compressed air system based on demand, ensuring that only the required amount of air is produced. By maintaining optimal system pressure, minimizing leaks, and reducing unnecessary air production, control and automation systems help achieve energy savings.

6. Leak Detection and Repair:

Air leaks in compressed air systems can lead to significant energy losses. Regular leak detection and repair programs help identify and fix air leaks promptly. By minimizing air leakage, the demand on the air compressor is reduced, resulting in energy savings. Utilizing ultrasonic leak detection devices can help locate and repair leaks more efficiently.

7. System Optimization and Maintenance:

Proper system optimization and routine maintenance are essential for energy savings in air compressors. This includes regular cleaning and replacement of air filters, optimizing air pressure settings, ensuring proper lubrication, and conducting preventive maintenance to keep the system running at peak efficiency.

By implementing these energy-saving technologies and practices, air compressor systems can achieve significant energy efficiency improvements, reduce operational costs, and minimize environmental impact.

air compressor

How are air compressors employed in the mining industry?

Air compressors play a crucial role in the mining industry, providing reliable and efficient power for various mining operations. Here are some common applications of air compressors in mining:

1. Exploration and Drilling:

Air compressors are used during exploration and drilling activities in the mining industry. Compressed air is used to power drilling rigs, pneumatic hammers, and other drilling equipment. The high-pressure air generated by the compressor helps in drilling boreholes, extracting core samples, and exploring potential mineral deposits.

2. Ventilation and Air Quality Control:

Air compressors are employed in underground mining to provide ventilation and control air quality. Compressed air is used to operate ventilation fans and air circulation systems, ensuring adequate airflow and removing harmful gases, dust, and fumes from the mining tunnels and work areas.

3. Material Conveyance:

In mining operations, air compressors are used for material conveyance. Pneumatic systems powered by air compressors are utilized to transport materials such as coal, ore, and other minerals. Compressed air is used to operate pneumatic conveyors, pumps, and material handling equipment, allowing for efficient and controlled movement of bulk materials.

4. Dust Suppression:

Air compressors are employed for dust suppression in mining areas. Compressed air is used to spray water or other suppressants to control dust generated during mining activities. This helps in maintaining a safe and healthy work environment, reducing the risks associated with dust inhalation and improving visibility.

5. Instrumentation and Control:

Air compressors are used for instrumentation and control purposes in mining operations. Compressed air is utilized to power pneumatic control systems, control valves, and actuators. These systems regulate the flow of fluids, control equipment movements, and ensure the proper functioning of various mining processes.

6. Explosive Applications:

In mining, air compressors are used for explosive applications. Compressed air is employed to power pneumatic tools used for rock fragmentation, such as rock drills and pneumatic breakers. The controlled power of compressed air enables safe and efficient rock breaking without the need for traditional explosives.

7. Maintenance and Repair:

Air compressors are essential for maintenance and repair activities in the mining industry. Compressed air is used for cleaning machinery, removing debris, and powering pneumatic tools for equipment maintenance and repair tasks. The versatility and portability of air compressors make them valuable assets in maintaining mining equipment.

It is important to note that different mining operations may have specific requirements and considerations when selecting and using air compressors. The size, capacity, and features of air compressors can vary based on the specific mining application and environmental conditions.

By utilizing air compressors effectively, the mining industry can benefit from increased productivity, improved safety, and efficient operation of various mining processes.

air compressor

What are the key components of an air compressor system?

An air compressor system consists of several key components that work together to generate and deliver compressed air. Here are the essential components:

1. Compressor Pump: The compressor pump is the heart of the air compressor system. It draws in ambient air and compresses it to a higher pressure. The pump can be reciprocating (piston-driven) or rotary (screw, vane, or scroll-driven) based on the compressor type.

2. Electric Motor or Engine: The electric motor or engine is responsible for driving the compressor pump. It provides the power necessary to operate the pump and compress the air. The motor or engine’s size and power rating depend on the compressor’s capacity and intended application.

3. Air Intake: The air intake is the opening or inlet through which ambient air enters the compressor system. It is equipped with filters to remove dust, debris, and contaminants from the incoming air, ensuring clean air supply and protecting the compressor components.

4. Compression Chamber: The compression chamber is where the actual compression of air takes place. In reciprocating compressors, it consists of cylinders, pistons, valves, and connecting rods. In rotary compressors, it comprises intermeshing screws, vanes, or scrolls that compress the air as they rotate.

5. Receiver Tank: The receiver tank, also known as an air tank, is a storage vessel that holds the compressed air. It acts as a buffer, allowing for a steady supply of compressed air during peak demand periods and reducing pressure fluctuations. The tank also helps separate moisture from the compressed air, allowing it to condense and be drained out.

6. Pressure Relief Valve: The pressure relief valve is a safety device that protects the compressor system from over-pressurization. It automatically releases excess pressure if it exceeds a predetermined limit, preventing damage to the system and ensuring safe operation.

7. Pressure Switch: The pressure switch is an electrical component that controls the operation of the compressor motor. It monitors the pressure in the system and automatically starts or stops the motor based on pre-set pressure levels. This helps maintain the desired pressure range in the receiver tank.

8. Regulator: The regulator is a device used to control and adjust the output pressure of the compressed air. It allows users to set the desired pressure level for specific applications, ensuring a consistent and safe supply of compressed air.

9. Air Outlet and Distribution System: The air outlet is the point where the compressed air is delivered from the compressor system. It is connected to a distribution system comprising pipes, hoses, fittings, and valves that carry the compressed air to the desired application points or tools.

10. Filters, Dryers, and Lubricators: Depending on the application and air quality requirements, additional components such as filters, dryers, and lubricators may be included in the system. Filters remove contaminants, dryers remove moisture from the compressed air, and lubricators provide lubrication to pneumatic tools and equipment.

These are the key components of an air compressor system. Each component plays a crucial role in the generation, storage, and delivery of compressed air for various industrial, commercial, and personal applications.

China Standard China High Performance 1.52m 3 /Min 18~20 Bar Integrated Combined 4-in 1 Screw Air Compressor with Air Dryer, Air Tank for Laser Cutting Machine air compressor price
editor by CX 2023-10-30

China OEM Rotary Screw Industrial Air Compressor AC CHINAMFG Ga22+FF air compressor for sale

Product Description

Atlas copco industrial rotary screw air compressor GA 11FF GA22
We can provide Atlas Copco / Quincy / Chicago Pneumatic / Xihu (West Lake) Dis.in Air compressor ,
Air compressor spare parts, Air dryer, Precision filter, Gas tank.

pack your goods?
There is 3 kinds of ways to packed the goods, which depends on your requirement
1. Packed with original package
2. Packed with your design package
3. Packed with our blank package, below is the example for referenc

Air Compressor Temperature Sensor for Atlas Copco FAQ
Q1: How can I get the quotation?
A: you can advise us the part number for checking, and we will quote to you soon by email

Q2: What kind of ways for transportation ?
A:In general by air, sea or Express.(like DHL,Fedex,TNT,etc.)

Q3: How do I know the quality of productions?
A:We have a strict series of quality control, and we have perfect after service system, which can help you to solve the problem soon

Q4: If i want to change model,size,package,etc. How can I do?
A:You can contact us by or mail, and we will revise according to your requirement

Q5: What is the terms of payment ?
A: T/T, Western Union, paypal

Warranty:	1 Year
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical
Structure Type:	Closed Type

Customization:	Available \|

air compressor

Are there special considerations for air compressor installations in remote areas?

Yes, there are several special considerations to take into account when installing air compressors in remote areas. These areas often lack access to infrastructure and services readily available in urban or well-developed regions. Here are some key considerations:

1. Power Source:

Remote areas may have limited or unreliable access to electricity. It is crucial to assess the availability and reliability of the power source for operating the air compressor. In some cases, alternative power sources such as diesel generators or solar panels may need to be considered to ensure a consistent and uninterrupted power supply.

2. Environmental Conditions:

Remote areas can present harsh environmental conditions that can impact the performance and durability of air compressors. Extreme temperatures, high humidity, dust, and corrosive environments may require the selection of air compressors specifically designed to withstand these conditions. Adequate protection, insulation, and ventilation must be considered to prevent damage and ensure optimal operation.

3. Accessibility and Transport:

Transporting air compressors to remote areas may pose logistical challenges. The size, weight, and portability of the equipment should be evaluated to ensure it can be transported efficiently to the installation site. Additionally, the availability of suitable transportation infrastructure, such as roads or air transportation, needs to be considered to facilitate the delivery and installation process.

4. Maintenance and Service:

In remote areas, access to maintenance and service providers may be limited. It is important to consider the availability of trained technicians and spare parts for the specific air compressor model. Adequate planning for routine maintenance, repairs, and troubleshooting should be in place to minimize downtime and ensure the longevity of the equipment.

5. Fuel and Lubricants:

For air compressors that require fuel or lubricants, ensuring a consistent and reliable supply can be challenging in remote areas. It is necessary to assess the availability and accessibility of fuel or lubricant sources and plan for their storage and replenishment. In some cases, alternative or renewable fuel options may need to be considered.

6. Noise and Environmental Impact:

Remote areas are often characterized by their natural beauty and tranquility. Minimizing noise levels and environmental impact should be a consideration when installing air compressors. Selecting models with low noise emissions and implementing appropriate noise reduction measures can help mitigate disturbances to the surrounding environment and wildlife.

7. Communication and Remote Monitoring:

Given the remote location, establishing reliable communication channels and remote monitoring capabilities can be essential for effective operation and maintenance. Remote monitoring systems can provide real-time data on the performance and status of the air compressor, enabling proactive maintenance and troubleshooting.

By addressing these special considerations, air compressor installations in remote areas can be optimized for reliable operation, efficiency, and longevity.

air compressor

How are air compressors utilized in pneumatic tools?

Air compressors play a crucial role in powering and operating pneumatic tools. Here’s a detailed explanation of how air compressors are utilized in pneumatic tools:

Power Source:

Pneumatic tools rely on compressed air as their power source. The air compressor generates and stores compressed air, which is then delivered to the pneumatic tool through a hose or piping system. The compressed air provides the force necessary for the tool to perform various tasks.

Air Pressure Regulation:

Air compressors are equipped with pressure regulation systems to control the output pressure of the compressed air. Different pneumatic tools require different air pressure levels to operate optimally. The air compressor’s pressure regulator allows users to adjust the output pressure according to the specific requirements of the pneumatic tool being used.

Air Volume and Flow:

Air compressors provide a continuous supply of compressed air, ensuring a consistent air volume and flow rate for pneumatic tools. The air volume is typically measured in cubic feet per minute (CFM) and determines the tool’s performance capabilities. Higher CFM ratings indicate that the pneumatic tool can deliver more power and operate at a faster rate.

Tool Actuation:

Pneumatic tools utilize compressed air to actuate their mechanical components. For example, an air-powered impact wrench uses compressed air to drive the tool’s internal hammer mechanism, generating high torque for fastening or loosening bolts and nuts. Similarly, air-powered drills, sanders, nail guns, and spray guns rely on compressed air to power their respective operations.

Versatility:

One of the significant advantages of pneumatic tools is their versatility, and air compressors enable this flexibility. A single air compressor can power a wide range of pneumatic tools, eliminating the need for separate power sources for each tool. This makes pneumatic tools a popular choice in various industries, such as automotive, construction, manufacturing, and woodworking.

Portability:

Air compressors come in different sizes and configurations, offering varying degrees of portability. Smaller portable air compressors are commonly used in applications where mobility is essential, such as construction sites or remote locations. The portability of air compressors allows pneumatic tools to be used in various work environments without the constraints of being tethered to a fixed power source.

Overall, air compressors are integral to the functionality and operation of pneumatic tools. They provide the necessary power, air pressure regulation, and continuous airflow required for pneumatic tools to perform a wide range of tasks efficiently and effectively.

air compressor

What are the safety considerations when operating an air compressor?

Operating an air compressor requires careful attention to safety to prevent accidents, injuries, and equipment damage. Here are some important safety considerations to keep in mind:

1. Read the Manual: Before operating an air compressor, thoroughly read and understand the manufacturer’s instruction manual. Familiarize yourself with the specific safety guidelines, recommended operating procedures, and any specific precautions or warnings provided by the manufacturer.

2. Proper Ventilation: Ensure that the area where the air compressor is operated has adequate ventilation. Compressed air can produce high levels of heat and exhaust gases. Good ventilation helps dissipate heat, prevent the buildup of fumes, and maintain a safe working environment.

3. Personal Protective Equipment (PPE): Always wear appropriate personal protective equipment, including safety glasses or goggles, hearing protection, and non-slip footwear. Depending on the task, additional PPE such as gloves, a dust mask, or a face shield may be necessary to protect against specific hazards.

4. Pressure Relief: Air compressors should be equipped with pressure relief valves or devices to prevent overpressurization. Ensure that these safety features are in place and functioning correctly. Regularly inspect and test the pressure relief mechanism to ensure its effectiveness.

5. Secure Connections: Use proper fittings, hoses, and couplings to ensure secure connections between the air compressor, air tools, and accessories. Inspect all connections before operation to avoid leaks or sudden hose disconnections, which can cause injuries or damage.

6. Inspect and Maintain: Regularly inspect the air compressor for any signs of damage, wear, or leaks. Ensure that all components, including hoses, fittings, and safety devices, are in good working condition. Follow the manufacturer’s recommended maintenance schedule to keep the compressor in optimal shape.

7. Electrical Safety: If the air compressor is electric-powered, take appropriate electrical safety precautions. Use grounded outlets and avoid using extension cords unless approved for the compressor’s power requirements. Protect electrical connections from moisture and avoid operating the compressor in wet or damp environments.

8. Safe Start-Up and Shut-Down: Properly start and shut down the air compressor following the manufacturer’s instructions. Ensure that all air valves are closed before starting the compressor and release all pressure before performing maintenance or repairs.

9. Training and Competence: Ensure that operators are adequately trained and competent in using the air compressor and associated tools. Provide training on safe operating procedures, hazard identification, and emergency response protocols.

10. Emergency Preparedness: Have a clear understanding of emergency procedures and how to respond to potential accidents or malfunctions. Know the location of emergency shut-off valves, fire extinguishers, and first aid kits.

By adhering to these safety considerations and implementing proper safety practices, the risk of accidents and injuries associated with operating an air compressor can be significantly reduced. Prioritizing safety promotes a secure and productive working environment.

China OEM Rotary Screw Industrial Air Compressor AC CHINAMFG Ga22+FF air compressor for sale
editor by CX 2023-10-27

China Hot selling 22kw 30HP Energy Saving Screw Air Compressor with Air Dryer for Industrial Equipment air compressor CHINAMFG freight

Product Description

22KW 30HP Energy Saving Screw Air Compressor With Air Dryer For Industrial Equipment

Main Features:

1. The flexible belt will be automatically tensioned in use. Through adjusting the tension, minimize the loss of pressure and power, to enhance the efficiency of compression.

2. Using the precise spin-oil separator and special two-pole buffer separation, it can minimize the oil consumption, guarantee the outlet gas purity, and extend the lifetime of filter elements.

3. With the toothed V-belt, it has good heat dissipation, long life, higher gear drive and transmission efficiency, as high as over 98%.

Oil Filter: Good Quality filters ensure longer working life and save the maintenance time and cost.

Stainless Steel Hoses: High and low temperature resistant, high pressure resistant.

Compressed Air Vessel: Reduction of pressure drops and energy costs, quality air with low oil content.

Air End: Imported DLOL air end, advanced profile design.

Electric Motor: Premium efficiency Totally TEFC IP54/IP55 motor (Class F insulation) protects against dust and chemicals etc.

Air Filter: Two-stage dust removal and filtering system with efficiency of up to 99.9% even in heavy-duty environment.

Cooler: High quality aluminum material, alternating expression cooler fins, ensure the perfect radiating effect.

Technical parameters:

Our workshop:

After-sales Service:	Free Spare Parts
Warranty:	One Year
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical

Customization:	Available \|

air compressor

What are the advantages of using an air compressor in construction?

Using an air compressor in construction offers numerous advantages that contribute to increased efficiency, productivity, and versatility. Here are some key benefits of using air compressors in construction:

Powering Pneumatic Tools: Air compressors are commonly used to power a wide range of pneumatic tools on construction sites. Tools such as jackhammers, nail guns, impact wrenches, drills, and sanders can be operated using compressed air. Pneumatic tools are often preferred due to their lightweight, compact design and ability to deliver high torque or impact force.
Efficient Operation: Air compressors provide a continuous and reliable source of power for pneumatic tools, allowing for uninterrupted operation without the need for frequent battery changes or recharging. This helps to maintain a smooth workflow and reduces downtime.
Portability: Many construction air compressors are designed to be portable, featuring wheels or handles for easy maneuverability on job sites. Portable air compressors can be transported to different areas of the construction site as needed, providing power wherever it is required.
Versatility: Air compressors are versatile tools that can be used for various applications in construction. Apart from powering pneumatic tools, they can also be utilized for tasks such as inflating tires, cleaning debris, operating air-operated pumps, and powering air horns.
Increased Productivity: The efficient operation and power output of air compressors enable construction workers to complete tasks more quickly and effectively. Pneumatic tools powered by air compressors often offer higher performance and faster operation compared to their electric or manual counterparts.
Cost Savings: Air compressors can contribute to cost savings in construction projects. Pneumatic tools powered by air compressors are generally more durable and have longer lifespans compared to electric tools. Additionally, since air compressors use compressed air as their power source, they do not require the purchase or disposal of batteries or fuel, reducing ongoing operational expenses.
Reduced Electrocution Risk: Construction sites can be hazardous environments, with the risk of electrocution from electrical tools or equipment. By utilizing air compressors and pneumatic tools, the reliance on electrical power is minimized, reducing the risk of electrocution accidents.

It is important to select the appropriate air compressor for construction applications based on factors such as required air pressure, volume, portability, and durability. Regular maintenance, including proper lubrication and cleaning, is crucial to ensure the optimal performance and longevity of air compressors in construction settings.

In summary, the advantages of using air compressors in construction include powering pneumatic tools, efficient operation, portability, versatility, increased productivity, cost savings, and reduced electrocution risk, making them valuable assets on construction sites.

air compressor

How does the horsepower of an air compressor affect its capabilities?

The horsepower of an air compressor is a crucial factor that directly impacts its capabilities and performance. Here’s a closer look at how the horsepower rating affects an air compressor:

Power Output:

Air Pressure:

Air Volume:

Duty Cycle:

Size and Portability:

air compressor

What is the purpose of an air compressor?

An air compressor serves the purpose of converting power, typically from an electric motor or an engine, into potential energy stored in compressed air. It achieves this by compressing and pressurizing air, which can then be used for various applications. Here’s a detailed explanation of the purpose of an air compressor:

1. Powering Pneumatic Tools: One of the primary uses of an air compressor is to power pneumatic tools. Compressed air can be used to operate a wide range of tools, such as impact wrenches, nail guns, paint sprayers, sanders, and drills. The compressed air provides the necessary force and energy to drive these tools, making them efficient and versatile.

2. Supplying Clean and Dry Air: Air compressors are often used to supply clean and dry compressed air for various industrial processes. Many manufacturing and production operations require a reliable source of compressed air that is free from moisture, oil, and other contaminants. Air compressors equipped with appropriate filters and dryers can deliver high-quality compressed air for applications such as instrumentation, control systems, and pneumatic machinery.

3. Inflating Tires and Sports Equipment: Air compressors are commonly used for inflating tires, whether it’s for vehicles, bicycles, or sports equipment. They provide a convenient and efficient method for quickly filling tires with the required pressure. Air compressors are also used for inflating sports balls, inflatable toys, and other similar items.

4. Operating HVAC Systems: Air compressors play a crucial role in the operation of heating, ventilation, and air conditioning (HVAC) systems. They provide compressed air for controlling and actuating dampers, valves, and actuators in HVAC systems, enabling precise regulation of air flow and temperature.

5. Assisting in Industrial Processes: Compressed air is utilized in various industrial processes. It can be used for air blow-off applications, cleaning and drying parts, powering air-operated machinery, and controlling pneumatic systems. Air compressors provide a reliable and efficient source of compressed air that can be tailored to meet the specific requirements of different industrial applications.

6. Supporting Scuba Diving and Breathing Systems: In scuba diving and other breathing systems, air compressors are responsible for filling diving tanks and supplying breathable air to divers. These compressors are designed to meet strict safety standards and deliver compressed air that is free from contaminants.

Overall, the purpose of an air compressor is to provide a versatile source of compressed air for powering tools, supplying clean air for various applications, inflating tires and sports equipment, supporting industrial processes, and facilitating breathing systems in specific contexts.

China Hot selling 22kw 30HP Energy Saving Screw Air Compressor with Air Dryer for Industrial Equipment air compressor CHINAMFG freight
editor by CX 2023-10-25